0
2605 results for "0"
Carte Principale
Repo de toutes les cartes électroniques utilisées par le CRINSA. Commencé en 2025 sous Kicad 8.0
Regle
Repo de toutes les cartes électroniques utilisées par le CRINSA. Commencé en 2025 sous Kicad 8.0
Pami superstar
Repo de toutes les cartes électroniques utilisées par le CRINSA. Commencé en 2025 sous Kicad 8.0
JOLT V1
12 degrees of freedom, 1 custom devboard, and 0 off-the-shelf solutions. JOLT is a quadruped robot built entirely from scratch.
Grove Vision AI Module V2
A macro pad with 11 cherry mx style switches, a rotary encoder and a 0.91 inch OLED screen
Wio LR1121 Module v0.9
A macro pad with 11 cherry mx style switches, a rotary encoder and a 0.91 inch OLED screen
Wio SX1262 for ESP32S3
A macro pad with 11 cherry mx style switches, a rotary encoder and a 0.91 inch OLED screen
Wio SX1262 for XIAO nRF52840
A macro pad with 11 cherry mx style switches, a rotary encoder and a 0.91 inch OLED screen
Seeed Studio XIAO nRF52840 v1.3
A macro pad with 11 cherry mx style switches, a rotary encoder and a 0.91 inch OLED screen
hwboard bike computer
HWBoard Bike Computer PCB: A KiCad hardware project for building a custom printed circuit board (PCB) designed for a feature-rich, open-source bike computer. Powered by Raspberry Pi Compute Module 0 (CM0).
ESP32 Dev Kit
A 2-layer PCB design of the ESP32 Dev Kit V1 (30-pin), created using KiCad 9.0. Includes complete schematics, layout, and BOM.
CM0IO
HWBoard Bike Computer PCB: A KiCad hardware project for building a custom printed circuit board (PCB) designed for a feature-rich, open-source bike computer. Powered by Raspberry Pi Compute Module 0 (CM0).
MokyaLora
Open-hardware Meshtastic feature phone — RP2350B dual-core, SX1262 LoRa, GNSS, 36-key keyboard, 2.4″ IPS display. CERN-OHL-S-2.0.
ESP32 PCB
This project involved the end-to-end design and development of a compact, low-power IoT system using the ESP32-C3-02 SoC and integrated TP4056 Li-ion battery charger. The goal was to create a reliable and modular platform for wireless environmental data monitoring, powered by a rechargeable battery with onboard protection and USB-C support.
drone lab air
Code and Hardware implementations for the drones built for the Laboratory of Autonomous Intelligent Robots - LAB-AIR, from the Federal University of Espírito Santo (UFES). This project is in active development, using a Teensy 4.0 microcontroller as the main board with Arduino IDE.
jamrf v2
Dual-band chaos-modulated RF transmitter (GPS L1 + WiFi 2.4 GHz). Open hardware, KiCad 9.0. CERN-OHL-P v2.
