1.3%22_128x64oled_i2c
2215 results for "1.3%22_128x64oled_i2c"
flags
8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests
tmarhguy
47
led panel 2
8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests
tmarhguy
47
led panel 4
8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests
tmarhguy
47
main control
8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests
tmarhguy
47
main logic
8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests
tmarhguy
47
adder8
8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests
tmarhguy
47
gate and 2in 8bit
8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests
tmarhguy
47
gate inv 8bit
8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests
tmarhguy
47
gate nand 2in 8bit
8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests
tmarhguy
47
gate nor 2in 8bit
8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests
tmarhguy
47
gate or 2in 8bit
8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests
tmarhguy
47
mux 8to1 8bit
8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests
tmarhguy
47
pico debug swd adapter
Passive adapter: Raspberry Pi Debug Probe (JST-SH 3-pin) to standard 2x5 1.27mm ARM Cortex SWD header. Single-sided, home-etched.
skibidi thinkbook 14 hub
a very skibidi usb hub with ethernet and 3.5mm to clip on my laptop. helps fix my broken 3.5mm jack too. usb 3.2 gen 1 hub
TFDU4101 breakout simplified
An easy-to-use, self-contained device that retrieves photos from the Casio WQV-1, WQV-2, WQV-3, and WQV-10 camera watches
TFDU4101 breakout
An easy-to-use, self-contained device that retrieves photos from the Casio WQV-1, WQV-2, WQV-3, and WQV-10 camera watches
WQV1 S3 SuperMini
An easy-to-use, self-contained device that retrieves photos from the Casio WQV-1, WQV-2, WQV-3, and WQV-10 camera watches
1.1
This is a Raspberry Pi HAT for RS485 communication with external devices and it should fit into any Raspberry Pi like Zero/Zero2W/3/4
1.2
This is a Raspberry Pi HAT for RS485 communication with external devices and it should fit into any Raspberry Pi like Zero/Zero2W/3/4
