Loading design…
Lucas-el-pato
PCB para Control de vuelo de un Dron para la materia de Proyecto 3 por Lucas Garcia e Hernan Ibarra
| Reference | Value | Description |
|---|---|---|
| IC1 | AP2112K-3.3TRG1 | 600mA 3.3V LDO Regulator Enable SOT23-5 DiodesZetex AP2112K-3.3TRG1, LDO Voltage Regulator, 3.3 V +/-1.5%, 2.5 6 Vin, 5-Pin SOT-23 |
| U2 | STM32F405RGTx | STMicroelectronics Arm Cortex-M4 MCU, 1024KB flash, 192KB RAM, 168 MHz, 1.8-3.6V, 51 GPIO, LQFP64 |
| U3 | LSM6DSV16XTR | |
| U4 | BMP388 | |
| U5 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U6 | TPS54302DDCR | |
| U7 |
| C1-C4,C8,C13,C15,C22-C27,C32,C33,C35 | 100nF | Unpolarized capacitor |
|---|
| C5,C6 | 15pF | Unpolarized capacitor |
|---|
| C7,C14,C34 | 10uF | Unpolarized capacitor |
|---|
| C12 | 75pF | Unpolarized capacitor |
|---|
| C16,C17 | 22uF | Unpolarized capacitor |
|---|
| C18,C19,C29 | 1uF | Polarized capacitor,Unpolarized capacitor |
|---|
| C20,C21 | 2.2uF | Unpolarized capacitor |
|---|
| C28 | 4.7u | Polarized capacitor |
|---|
| C30,C31 | 12pF | Unpolarized capacitor |
|---|
| C36 | 10 nF | Unpolarized capacitor |
|---|
| C37 | 1 uF | Unpolarized capacitor |
|---|
| CARD1 | MICRO SD |
|---|
| D1,D3,D4 | D_Schottky | Schottky diode |
|---|
| D2 | D_ST | Schottky diode |
|---|
| D7,D8 | LED | Light emitting diode |
|---|
| F1 | 2.5A | Resettable fuse, polymeric positive temperature coefficient |
|---|
| F2-F5 | 750mA | Resettable fuse, polymeric positive temperature coefficient |
|---|
| J1,J6 | Screw_Terminal_01x04 | Generic screw terminal, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J2 | Screw_Terminal_01x03 | Generic screw terminal, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J3 | Screw_Terminal_01x06 | Generic screw terminal, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J4 | Screw_Terminal_01x08 | Generic screw terminal, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| LSE1 | Crystal | Two pin crystal |
|---|
| R3,R12,R17 | 100k | Resistor |
|---|
| R9 | 511K | Resistor |
|---|
| R10 | 105K | Resistor |
|---|
| R11 | 49.9 | Resistor |
|---|
| R13 | 13.3K | Resistor |
|---|
| R15,R16 | 5k1 | Resistor |
|---|
| R18 | 15k | Resistor |
|---|
| SwBoot1 | SW_Nidec_CAS-120A1 | Switch, single pole double throw |
|---|
| SwReset1 | SW_Push | Push button switch, generic, two pins |
|---|