battery_cell
244 results for "battery_cell"
Project63 BMS DaughterBoard
Distributed BMS designed for FSAE around the STM32 microcontroller and BQ79616/BQ79614/BQ79612 precision battery monitor, balancer and integrated protector.
FSAE BMS
Distributed BMS designed for FSAE around the STM32 microcontroller and BQ79616/BQ79614/BQ79612 precision battery monitor, balancer and integrated protector.
CR2032 Toaster v1.3b
CR2032 to 1/2AA converter to use in various old Macintosh computers that used 1/2AA batteries as the PRAM battery.
SolarPowerhouse
Solar balkony power plant, which includes control logic for switching between micro inverter and battery depending on the state of charge. The repository containing any drawings and manuals.
welld
ESP32-C6 Zigbee well monitor — reads a 4–20 mA pressure transducer and DS18B20, reports water level, temperature, and battery to Zigbee2MQTT with OTA update support
welld
ESP32-C6 Zigbee well monitor — reads a 4–20 mA pressure transducer and DS18B20, reports water level, temperature, and battery to Zigbee2MQTT with OTA update support
MCU PROTO 100x68mm
Misistemote is an Open Source, modular ecosystem that uses pre-made PCB to mix and match your choice of processor board. Is oriented to make small, mobile, battery powered electronic projects work in real conditions in a very short time.
galopago
12
mcu proto 115x70mm
Misistemote is an Open Source, modular ecosystem that uses pre-made PCB to mix and match your choice of processor board. Is oriented to make small, mobile, battery powered electronic projects work in real conditions in a very short time.
galopago
12
MCU PROTO 83x58mm
Misistemote is an Open Source, modular ecosystem that uses pre-made PCB to mix and match your choice of processor board. Is oriented to make small, mobile, battery powered electronic projects work in real conditions in a very short time.
galopago
12
mcu proto 90x60mm
Misistemote is an Open Source, modular ecosystem that uses pre-made PCB to mix and match your choice of processor board. Is oriented to make small, mobile, battery powered electronic projects work in real conditions in a very short time.
galopago
12
ESP32 PCB
This project involved the end-to-end design and development of a compact, low-power IoT system using the ESP32-C3-02 SoC and integrated TP4056 Li-ion battery charger. The goal was to create a reliable and modular platform for wireless environmental data monitoring, powered by a rechargeable battery with onboard protection and USB-C support.
RingOne
3D air mouse based on STM32 - Can be used for controlling CADs and every other manipulation in 3D space. Is based around STM32L452, IMU LSM6DSL (gyroscope and accelerometer) and Bluetooth low power module RN4871. Also contains battery management system for charging internal battery and also powering itself from this li-po battery (around 40 mah). Battery can be recharged via USB type C which can be also used for streaming data from accelerometer.
speaking clock
A talking clock for visually impaired users. ESP32 controlled, fully offline, long battery life.
lhm0
1
speaking clock smd
A talking clock for visually impaired users. ESP32 controlled, fully offline, long battery life.
lhm0
1
ATtiny board
A repository to hold all the code written for the MSP430 microcontroller I used while building my energy harvesting powered bicycle odometer. This bike odometer doesn't use a battery, so harvests energy from a small PV panel. Because of the very low amount of power available the very low power capable MSP430 microcontroller had to be used.
