module_mpu6050
1699 results for "module_mpu6050"
adapter
A range of gadgets that can be plugged in to the PAL-1 RIOT Expansion Module to provide specific functionality.
ft
A range of gadgets that can be plugged in to the PAL-1 RIOT Expansion Module to provide specific functionality.
snes adapter
A range of gadgets that can be plugged in to the PAL-1 RIOT Expansion Module to provide specific functionality.
Nano ITX Carrier for LattePanda Mu
A feature rich Nano-ITX carrier board for holding the upgradable MU module
power ring
accessible k3s platform targeting RPis and other SBCs vertically integrated with an off-grid solar setup and 4G/5G SIM module for outage-resistant web hosting
main
faebrylyzer is an 8 channel logic analyser compatible with the fx2lafw firmware and is designed to be integrated as a module into other projects.
hwboard bike computer
HWBoard Bike Computer PCB: A KiCad hardware project for building a custom printed circuit board (PCB) designed for a feature-rich, open-source bike computer. Powered by Raspberry Pi Compute Module 0 (CM0).
VERTECS CCB A
The VERTECS CCB, is an open-source payload interface board leveraging Commercial Off-The-Shelf (COTS) components with a Raspberry Pi Compute Module 4 at its core. Originally developed for the VERTECS 6U Astronomical Nanosatellite, the board has been opened-sourced and made available for use in future nanosatellite projects.
CM0IO
HWBoard Bike Computer PCB: A KiCad hardware project for building a custom printed circuit board (PCB) designed for a feature-rich, open-source bike computer. Powered by Raspberry Pi Compute Module 0 (CM0).
kombo TP4056 m
Декоративное устройство на микроконтроллере STM32 и адресных светодиодах WS2812, управляемое по радиоканалу радиомодулем NRF24L01+. Decorative device based on an STM32 microcontroller and WS2812 addressable LEDs controlled via a radio channel by an NRF24L01+ radio module
kombo nrf24 stm32f030
Декоративное устройство на микроконтроллере STM32 и адресных светодиодах WS2812, управляемое по радиоканалу радиомодулем NRF24L01+. Decorative device based on an STM32 microcontroller and WS2812 addressable LEDs controlled via a radio channel by an NRF24L01+ radio module
TCE
The Two Comparator Effect. Originally designed by Rob Schafer, later improved by cyberboy666, and now turned into a Eurorack module by Octovolt.
Okapi
Hardware designs for a large scale high performance telemetered data logger, centered around a Particle Boron RF module
Okapi
Hardware designs for a large scale high performance telemetered data logger, centered around a Particle Boron RF module
RingOne
3D air mouse based on STM32 - Can be used for controlling CADs and every other manipulation in 3D space. Is based around STM32L452, IMU LSM6DSL (gyroscope and accelerometer) and Bluetooth low power module RN4871. Also contains battery management system for charging internal battery and also powering itself from this li-po battery (around 40 mah). Battery can be recharged via USB type C which can be also used for streaming data from accelerometer.
RP2040 SOS band
PCB design files for RP2040 based SmartWatch. It features an accelerometer, a GPS module and a cellular module.
