temp

547 results for "temp"

oshpark 6 layer board

OSHPark 6 Layer PCB KiCad Template

KiBot Project Test

A test project for the video tutorial using KDT_Hierarchical_KiBot template

iec62386 panel

Wall panel for smart homes. 2 wires, no polarity, arbitrary bus topology, exchangeable front panel with hardware capacitive buttons, temperature+humidity+pressure+CO2. It is designed to be DALI-compatible but it is not ready to be certified yet. Don't connect it to an actual DALI network because the firmware is not ready yet.

iec62386 panel front test

Wall panel for smart homes. 2 wires, no polarity, arbitrary bus topology, exchangeable front panel with hardware capacitive buttons, temperature+humidity+pressure+CO2. It is designed to be DALI-compatible but it is not ready to be certified yet. Don't connect it to an actual DALI network because the firmware is not ready yet.

tkci

Starting template for KiCad projects

dumber v3

Projet sur le Temps Réel avec Xenomai

dumber v3

Projet sur le Temps Réel avec Xenomai

shield Pi Xbee

Projet sur le Temps Réel avec Xenomai

MoistureSensor

BLE soil moisture sensor + temperature sensor project using TI MSP430 MCU.

PewCB.2x2Base

Repo with design files and templates for various PewCB blanks

PewCB.3x3Base

Repo with design files and templates for various PewCB blanks

PewCB.5x5Base

Repo with design files and templates for various PewCB blanks

Sensor Board

M-Sens is a wireless module who can measure temperature and relative humidity in a room

Switch Board

M-Sens is a wireless module who can measure temperature and relative humidity in a room

STM32G431C8T6

STM32G431C8T6 system board, temporarily designed for the 2024 Electronic Design Competition.

PlantWatering PCB01

A smart irrigation system for irrigation of up to 6 plants. It monitors the moisture, temperature, CO2 concentration, air quality ... and displays the data on a 2.4" TFT Display using an ESP32 DevKit C as processor.

PlantWatering PCB02

A smart irrigation system for irrigation of up to 6 plants. It monitors the moisture, temperature, CO2 concentration, air quality ... and displays the data on a 2.4" TFT Display using an ESP32 DevKit C as processor.

whole

A smart irrigation system for irrigation of up to 6 plants. It monitors the moisture, temperature, CO2 concentration, air quality ... and displays the data on a 2.4" TFT Display using an ESP32 DevKit C as processor.

Temperatur Thermofuse PCB

Standalone sauna controller running ESPHome, compatible with Home Assistant for smart temperature, timer, and lighting control.

JLC06161H 3313

Template for kicad rules for JLCPCB JLC06161H-3313 stackup

Drawing Template

A collection of plugins, templates, settings, etc. that I regularly use for KiCad.

Back14Next