usb 226 bry
555 results for "usb 226 bry"
DAC ADC PWM IO
STM32 microcontroller with lots of periferials such as ADC, differential ADC, Input Capture, PWM, USB, Encoder, DAC, Digital Input, RTC, CAN-bus + Alarm etc.
BCR Breakout
Adapter to get 5vdc from the BCR port on TRS-80 Model 100 and similar computers, and provide it on a standard usb port.
Adapter 9 from 2040
WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.
tebl
28
Arcade 2040
WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.
tebl
28
C64 Joykey 2040
WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.
tebl
28
C64 Joykey
WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.
tebl
28
Adapter 9 FaceplateB
WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.
tebl
28
C64 Joykey Faceplate A1
WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.
tebl
28
C64 Joykey Faceplate X1
WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.
tebl
28
Monotron 002
A modification for Korg's Monotron Delay, which makes it accept standard Eurorack CV voltages (Pitch, Gate and Cutoff CV). The mod also provides an option to power the monotron via micro-USB.
MOTOR RF HAT
RP2040-based AZ/EL rotator controller for SatNOGS-compatible satellite ground stations. Custom PCB, PID motor control, EasyComm/hamlib protocol over USB.
motorPCB
RP2040-based AZ/EL rotator controller for SatNOGS-compatible satellite ground stations. Custom PCB, PID motor control, EasyComm/hamlib protocol over USB.
RF HAT
RP2040-based AZ/EL rotator controller for SatNOGS-compatible satellite ground stations. Custom PCB, PID motor control, EasyComm/hamlib protocol over USB.
esp32 hw130 adapter
ESP32 DVD pen plotter with HW-130 L293D shield: custom firmware, socket-plug wiring, USB/Bluetooth G-code
Interrupter v1.2
Custom 4-layer interrupter control board for DRSSTC systems. STM32F405-based, fiber-optically isolated outputs, hardware E-brake safety chain, and controlled-impedance routing (90Ω USB, 50Ω FSMC/SDIO). Designed in KiCad 9.0.
machxo2 design kicad
Development/eval board for Lattice MachX02 FPGA, TPS543320 & TPSM8282 DC-DC converters, and FTDI2232H USB-JTAG chip.
kratos pack
Battery case with electronics for charging and protection of battery cells. Composes of 2s li-ion 3,7V battery cells. Includes undervoltage, overvoltage and overcurrent protection. As well as reverse voltage protection. Is charged from USB type-C connector. Support statistics over USB and have battery voltage indication via LEDs.
RingOne
3D air mouse based on STM32 - Can be used for controlling CADs and every other manipulation in 3D space. Is based around STM32L452, IMU LSM6DSL (gyroscope and accelerometer) and Bluetooth low power module RN4871. Also contains battery management system for charging internal battery and also powering itself from this li-po battery (around 40 mah). Battery can be recharged via USB type C which can be also used for streaming data from accelerometer.
usb to roller ctrl
A small (3.5" x 5.6") Colecovision Portable that uses composite output and +5v power supply.
