Reference electronics designs for sensor – Page 12

load cell amplifier

Project that process data from pressure sensor to control the punch sharpening

dodotronix

0

sigamp

Project that process data from pressure sensor to control the punch sharpening

dodotronix

0

subtractMod

Project that process data from pressure sensor to control the punch sharpening

dodotronix

0

pressurePlate

Control a rig for manual testing of sensors

shepai

0

Schlaubi Schlumpf

Measurement Setup to analyze multiple ferroelectric sensors simultaneously

TUDA-MUST

0

PickleRick

A more compact Ricardo classic featuring a new sensor array, 4 pyro channels and 4 servo channels. Includes Ricardo bus plug too.

ESP32 IOT PCB

A comprehensive, multi-sensor IoT telemetry dashboard built around the Freenove ESP32-WROOM development board. This custom KiCad printed circuit board (PCB) integrates precision environmental sensing, analog ambient monitoring, local edge storage, and a physical user interface featuring a TFT display and rotary encoder.

S8550

BME280

AMS1117-1.8

ENS160-BGLT

AnmolS-EE

0

mmWave playkit

[WIP] mmwave sensing project using seeedstudio 24GHz mmwave sensor and xiao esp32-s3

XIAO-ESP32-S3-DIP

m1cha3l-s

0

flipper as7331 adapter

A Flipper Zero application to measure UV radiation using the AS7331 sensor.

michaelbaisch

35

low profile minifit

A more compact Ricardo classic featuring a new sensor array, 4 pyro channels and 4 servo channels. Includes Ricardo bus plug too.

icl-rocketry

2

airnode s3

Multifunction ESP32 (S3/C6/C3) home IoT room sensor nodes — KiCad 8 hardware, ESPHome firmware, JLCPCB-ready. One per room: presence (mmWave/PIR), BLE tracking, temp/RH, VOC, CO2, PM, lux, addressable LEDs.

AskAlice

0

roomnode c3 mini

Multifunction ESP32 (S3/C6/C3) home IoT room sensor nodes — KiCad 8 hardware, ESPHome firmware, JLCPCB-ready. One per room: presence (mmWave/PIR), BLE tracking, temp/RH, VOC, CO2, PM, lux, addressable LEDs.

AskAlice

0

roomnode c6

Multifunction ESP32 (S3/C6/C3) home IoT room sensor nodes — KiCad 8 hardware, ESPHome firmware, JLCPCB-ready. One per room: presence (mmWave/PIR), BLE tracking, temp/RH, VOC, CO2, PM, lux, addressable LEDs.

AskAlice

0

roomnode s3

Multifunction ESP32 (S3/C6/C3) home IoT room sensor nodes — KiCad 8 hardware, ESPHome firmware, JLCPCB-ready. One per room: presence (mmWave/PIR), BLE tracking, temp/RH, VOC, CO2, PM, lux, addressable LEDs.

AskAlice

0