4 20ma%20to%20dc%20converter
1118 results for "4 20ma%20to%20dc%20converter"
This is a Microbadge
Do you find Minibadges too big? Do you want to go even smaller? Try out the Microbadge! A minibadge can hold 4 of them!
MokyaLora
Open-hardware Meshtastic feature phone — RP2350B dual-core, SX1262 LoRa, GNSS, 36-key keyboard, 2.4″ IPS display. CERN-OHL-S-2.0.
ESP32P4C5 Board
This dual-MCU repository features a heterogeneous architecture pairing an ESP32-P4 application processor with an ESP32-C5 Wi-Fi 6/BLE hub. Linked over a high-bandwidth 4-bit parallel SDIO interconnect, this design decouples heavy multimedia task execution from the networking stack to completely eliminate application interrupt starvation.
PlantWatering PCB01
A smart irrigation system for irrigation of up to 6 plants. It monitors the moisture, temperature, CO2 concentration, air quality ... and displays the data on a 2.4" TFT Display using an ESP32 DevKit C as processor.
PlantWatering PCB02
A smart irrigation system for irrigation of up to 6 plants. It monitors the moisture, temperature, CO2 concentration, air quality ... and displays the data on a 2.4" TFT Display using an ESP32 DevKit C as processor.
whole
A smart irrigation system for irrigation of up to 6 plants. It monitors the moisture, temperature, CO2 concentration, air quality ... and displays the data on a 2.4" TFT Display using an ESP32 DevKit C as processor.
drone lab air
Code and Hardware implementations for the drones built for the Laboratory of Autonomous Intelligent Robots - LAB-AIR, from the Federal University of Espírito Santo (UFES). This project is in active development, using a Teensy 4.0 microcontroller as the main board with Arduino IDE.
1.1
This is a Raspberry Pi HAT for RS485 communication with external devices and it should fit into any Raspberry Pi like Zero/Zero2W/3/4
1.2
This is a Raspberry Pi HAT for RS485 communication with external devices and it should fit into any Raspberry Pi like Zero/Zero2W/3/4
uw rs485 hat
This is a Raspberry Pi HAT for RS485 communication with external devices and it should fit into any Raspberry Pi like Zero/Zero2W/3/4
uw rs485 hat
This is a Raspberry Pi HAT for RS485 communication with external devices and it should fit into any Raspberry Pi like Zero/Zero2W/3/4
uw rs485 hat V5
This is a Raspberry Pi HAT for RS485 communication with external devices and it should fit into any Raspberry Pi like Zero/Zero2W/3/4
V9
This is a Raspberry Pi HAT for RS485 communication with external devices and it should fit into any Raspberry Pi like Zero/Zero2W/3/4
Radianite Buddy2
A collection of Radianite boards we have designed so far. All are licensed under CC BY-SA 4.0
Radianite MicroNeo2
A collection of Radianite boards we have designed so far. All are licensed under CC BY-SA 4.0
Radianite Neuron
A collection of Radianite boards we have designed so far. All are licensed under CC BY-SA 4.0
Radianite Novice RISCV X
A collection of Radianite boards we have designed so far. All are licensed under CC BY-SA 4.0
Radianite Novice RISCV
A collection of Radianite boards we have designed so far. All are licensed under CC BY-SA 4.0
Radianite ProjectEous
A collection of Radianite boards we have designed so far. All are licensed under CC BY-SA 4.0
Radianite ProjectLemonIrvine
A collection of Radianite boards we have designed so far. All are licensed under CC BY-SA 4.0