boards
zeankundev
A collection and an archive of KiCad projects I made. Contains projects from 2023 - 2024.
Components (40)
| Reference | Value | Description |
|---|---|---|
| U1 | RP2350_60QFN | |
| U2 | FUSB302BMPX | Programmable USB Type-C Controller w/PD, I2C address 0x22, WQFN-14 |
| U4 | LDO40LPU33RY | 400mA, 3.5V-38V input, fixed positive 3.3V output, LDO regulator with enable, DFN-6 |
| U5 | TPD4E05U06DQA | 4-Channel ESD Protection for Super-Speed USB 3.0 Interface, USON-10 |
| U6 | ESP32-C6FH4 | ESP32-C6, ultra-low-power SoC with RISC-V single-core microprocessor,2.4 GHz Wi-Fi 6 (802.11 ax), Bluetooth 5 (LE), Zigbee and Thread (802.15.4),QFN-32 |
| U7 | KXTJ3-1057 | ±2g / 4g / 8g / 16g Tri-Axis Digital Accelerometer, I2C, 1.71-3.6V, LGA-12 |
| U8 | W25Q32JVZP | 32Mbit / 4MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, WSON-8 |
| AE1 | Antenna_Chip | Ceramic chip antenna with pin for PCB trace |
| C5-C8,C26,C31,C36 | 1u | Unpolarized capacitor |
| C9-C12,C24 | 4.7u | Unpolarized capacitor |
| C13-C21,C25,C28,C29,C39 | 100n | Unpolarized capacitor |
| C22,C23 | 15p | Unpolarized capacitor |
| C27 | 10u | Unpolarized capacitor |
| C30 | 10n | Unpolarized capacitor |
| C32,C33 | 1.6p | Unpolarized capacitor |
| C34,C35 | 26p | Unpolarized capacitor |
| D1 | MBR120VLSFT1G | Schottky diode |
| D2 | RED | Diode |
| D3 | GREEN | Diode |
| D4,D5 | WS2812B-2020 | RGB LED with integrated controller, 2.0 x 2.0 mm, 12 mA |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J2,J3 | Conn_01x20 | Generic connector, single row, 01x20, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 3.3u | Inductor |
| L2 | 2n | Inductor |
| L3 | 2.8n | Inductor |
| R1,R2 | 27 | Resistor |
| R3 | 33 | Resistor |
| R4 | 200 | Resistor |
| R5 | 1 | Resistor |
| R6,R8,R11,R12 | 10k | Resistor |
| R7 | 470 | Resistor |
| R9,R10 | 330 | Resistor |
| R13,R14 | 1k | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |
| TP1 | SWDIO | test point (alternative probe-style design) |
| TP2 | SWCLK | test point (alternative probe-style design) |
| TP3 | ESP_TX | test point (alternative probe-style design) |
| TP4 | ESP_RX | test point (alternative probe-style design) |
| Y1 | 12MHz | Four pin crystal, GND on pins 2 and 4 |
| Y2 | 40MHz | Four pin crystal, GND on pins 2 and 4 |