boards
zeankundev
A collection and an archive of KiCad projects I made. Contains projects from 2023 - 2024.
Components (37)
| Reference | Value | Description |
|---|---|---|
| U1 | EA3036 | |
| U2 | XC6SLX9-FTG256 | Spartan 6 LX 9 XC6SLX9-FTG256 |
| U3 | RP2350_60QFN | |
| U4 | ZD25WQ32CEIGR | 2MB Serial SPI Flash by Gigadevice |
| U5,U6 | W955K8MBYA | |
| U7 | CY7C65215-32LTXI | USB-Serial Dual Channel Bridge with CapSense Full-Speed 12 Mbps, +1.71V to +5.5V VDD, UART/I2C/SPI/RS232/RS422/JTAG, QFN-32 |
| C1-C3 | 10u | Unpolarized capacitor |
| C4,C5 | 10uF | Unpolarized capacitor |
| C6,C10-C12,C15,C18,C20,C22,C34,C37,C41,C44 | 4.7u | Unpolarized capacitor |
| C7,C8 | 0.1uF | Unpolarized capacitor |
| C9,C14,C35,C36,C42,C43 | 100u | Unpolarized capacitor |
| C13,C16,C17,C33,C38-C40,C45,C46 | 0.47u | Unpolarized capacitor |
| C19,C21,C23-C30,C48,C49 | 100n | Unpolarized capacitor |
| C31,C32,C47 | 15p | Unpolarized capacitor |
| C50 | 1u | Unpolarized capacitor |
| D1,D2 | 1N5819HW-7-F | Diode |
| J1 | USB_RP2350A | USB 2.0-only 16P Type-C Receptacle connector |
| J2 | USB_FPGA | USB 2.0-only 16P Type-C Receptacle connector |
| J3,J4 | USB_A | USB Type A connector |
| J5 | HDMI_A | HDMI type A connector |
| J6 | Conn_02x20_Odd_Even | Generic connector, double row, 02x20, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1,L2 | 2.2uH | Inductor |
| L3 | 3.3u | Inductor |
| R1-R4 | 5.1k | Resistor |
| R5-R8 | 27 | Resistor |
| R9 | 150k | Resistor |
| R10,R13 | 500k | Resistor |
| R11 | 33 | Resistor |
| R12 | 680k | Resistor |
| R14 | 1k | Resistor |
| R15,R16 | 10k | Resistor |
| R17,R18 | 100k | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |
| TP1 | RUN | test point |
| TP2,TP3 | TestPoint | test point |
| X1 | ASE-50MHz | 3.3V CMOS SMD Crystal Clock Oscillator, Abracon |
| Y1 | 12MHz | Four pin crystal, GND on pins 2 and 4 |