pcb-consortium
zOnlyKroks
Components (32)
| Reference | Value | Description |
|---|---|---|
| Q1-Q3 | NMOS | N-MOSFET transistor, drain/source/gate |
| U1 | BQ25798 | I2C controlled, 5A Buck-Boost battery charger (1-4 cell, Li-Ion / Li-Polymer), USB BC1.2 / HVDCP detection, 3.6..24V VBUS, 3..18.8V charge voltage regulation, 0.75..1.5 MHz, VQFN-29 (Texas RQM0029A) |
| U2 | CH552G | |
| U3 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| C1 | 2.2 uF | Unpolarized capacitor, small symbol |
| C2,C6,C12,C18 | 0.1 uF | Unpolarized capacitor, small symbol |
| C3,C4,C23,C24 | 47 nF | Unpolarized capacitor, small symbol |
| C5 | 4.7 uF | Unpolarized capacitor, small symbol |
| C7-C11,C13-C15,C19-C22,C25,C26 | 10 uF | Unpolarized capacitor, small symbol |
| C16,C17 | 33 uF | Unpolarized capacitor, small symbol |
| C27,C28 | 100nF | Unpolarized capacitor, small symbol |
| D1 | LED | Light emitting diode |
| D2 | BZX384-B12,115 | Zener diode |
| J2 | IN | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | UPS | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | BAT | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | USB_C_Receptacle_USB2.0 | |
| L1 | 1 uH | Inductor |
| R1 | 2.2k | Resistor, small symbol |
| R2 | 2 | Resistor, small symbol |
| R3 | 127k | Resistor, small symbol |
| R4 | 100k | Resistor, small symbol |
| R5 | 6.04k | Resistor, small symbol |
| R6 | 294 | Resistor, small symbol |
| R7 | 100 | Resistor, small symbol |
| R8 | 5.2k | Resistor, small symbol |
| R9 | 30.31k | Resistor, small symbol |
| R10,R11 | 5.1k | |
| R12,R15,R16 | 10k Ohm | Resistor |
| R13,R14 | 22 | |
| SW1-SW3 | KH-6X6X5H-STM | |
| TH1 | 10k | Temperature dependent resistor |