PorpDAQ
ybabs
Design Files for a STM32-Based Underwater Acoustics data acquisition board for harbour porpoises
Components (56)
| Reference | Value | Description |
|---|---|---|
| IC1,IC2 | OPA659IDBVR | Wideband, Unity-Gain Stable, JFET-Input OPERATIONAL AMPLIFIER |
| IC3 | LMH6643MAX_NOPB | Dual Channel, Low Power, 130MHz, 75mA Rail-to-Rail Output Amplifier |
| IC4 | TPS65133DPDR | Split-Rail Converter, +/-5V, 250mA Dual Output Power Supply |
| IC5 | TPS62111RSAT | 3.3-V, 1.5-A, 17-V Vin Step-Down Converter in QFN-16 |
| IC6 | STM32H747IIT6 | MCU 32-bit ARM Cortex M7/M4 RISC 2MB Flash 3.3V 176-Pin LQFP Tray |
| Module1 | ComputeModule4 | |
| Q1 | AO3401A | 30V P-Channel MOSFET |
| BT1 | Battery_Cell | |
| C1-C4 | 100p | |
| C5 | 10p | |
| C6,C7,C9,C39,C42 | 10u | |
| C8,C14-C22,C24,C26-C38,C44,C50 | 100n | |
| C10 | 10u x5R 25V | |
| C11 | 22u x7R 10V | |
| C12,C23,C25 | 1u | |
| C13,C43,C46,C47,L1,L2 | 4.7u | |
| C40 | 1u_X5R_0603 | |
| C41 | 220p | |
| C45 | 2.2u | |
| C48,C49 | 12p | |
| C51,C52 | 1.5p | |
| D1 | SS14 | |
| D2 | LED_Red | |
| D3 | LED | |
| F1 | Polyfuse | |
| FB1 | 600 @ 100MHz | |
| FB2 | 100 @ 100 MHz | |
| FB3 | 18 @100Mhz | |
| H1-H4 | MountingHole | |
| J1 | Conn_Coaxial | |
| J2 | USB_C_Receptacle_USB2.0 | |
| J3 | SWDIO | |
| J4 | Micro_SD_Card | |
| J5 | DJI UART | |
| J6 | Conn_01x02_Female | |
| L3 | 6.8u | |
| L4 | 2.2uH | |
| R1 | 44.2k | |
| R2 | 66.5k | |
| R3 | 6.34k | |
| R4 | 35.7k | |
| R5 | 34.8k | |
| R6,R19,R27 | 10k | |
| R7,R9 | 187 | |
| R8,R10 | 2.49k | |
| R11,R14 | 100k | |
| R12,R13 | 50k | |
| R15,R16 | 5.1k | |
| R17 | 1M | |
| R18,R20 | 47 | |
| R21 | 2k2 | |
| R22-R26 | 47k | |
| R28 | 2.2k | |
| S1 | TL1105CF160Q | Tactile Switches 6X6X8MM 160GF |
| Y1 | 16MHz | |
| Y2 | 32.768KHz |