sample-and-hold
xdylanm
Components (32)
| Reference | Value | Description |
|---|---|---|
| Q1 | BC547 | 0.1A Ic, 45V Vce, Small Signal NPN Transistor, TO-92 |
| U1 | 40106 | Hex Schmitt trigger inverter |
| U2 | LF398_DIP8 | Sample And Hold Unity Gain Follower, DIP-8 |
| U3 | TL072 | Dual Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8 |
| C1 | 1u | Unpolarized capacitor |
| C2,C3 | 1n | Unpolarized capacitor |
| C4,C7,C8,C17 | 10u | Polarized capacitor, US symbol,Unpolarized capacitor |
| C5 | 22u | Unpolarized capacitor |
| C6 | 22p | Unpolarized capacitor |
| C9-C15 | 100n | Unpolarized capacitor |
| C16 | 10n | Unpolarized capacitor |
| D1 | 1N4148 | 100V 0.15A standard switching diode, DO-35 |
| D2 | LED | Light emitting diode |
| D3,D4 | 1N5819 | Schottky diode |
| J1 | Trigger | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) |
| J2 | In | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) |
| J3 | Attenuverter In | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) |
| J4 | Out | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) |
| J5 | Smooth Out | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) |
| J6 | Attenuverter Out | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) |
| J7 | Pwr | Generic connector, double row, 02x05, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1,R8-R10,R15,R16 | 1k | Resistor, US symbol |
| R2,R7 | 4k7 | Resistor, US symbol |
| R3 | 10k | Resistor, US symbol |
| R4 | 15k | Resistor, US symbol |
| R5,R11,R12,R14,RV3 | 100k | Potentiometer, US symbol,Resistor, US symbol |
| R6 | 6k8 | Resistor, US symbol |
| R13 | 47k | Resistor, US symbol |
| R17,R18 | 10 | Resistor, US symbol |
| RV1 | 1M0 | Potentiometer, US symbol |
| RV2 | A100k | Dual potentiometer |
| SW1 | SW_SPDT | Switch, single pole double throw |