Loading design…
xboxoneresearch
Facet2 FabA PCB Clone
| Reference | Value | Description |
|---|---|---|
| U1 | 93LC56B | Serial EEPROM, 93 Series, 2.5V, SOT-23-6 |
| U2,U4 | SN74CB3T3245PWR | 2.3V~3.6V TSSOP-20 Signal Switches, Multiplexers, Decoders ROHS |
| U3 | SN74AUP2G07DCKR | 2-ch, 0.8-V to 3.6-V low power buffers with open-drain outputs |
| U5 | SN74LVC1G06DCKR | Single 1.65-V to 5.5-V inverter with open-drain outputs |
| U6 | 74LVC1G07DBV | Single Buffer Gate, Open Drain, Low-Voltage CMOS |
| U7 | FT4232H | Hi Speed Quad Channel USB UART/FIFO, LQFP/QFN-64 |
| U8 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U9 | ISO1540 | I2C Isolator, 2.5 kVrms, Bidirectional clock and data, SOIC-8 |
| U10 | STM32G031J6Mx | STMicroelectronics Arm Cortex-M0+ MCU, 32KB flash, 8KB RAM, 64 MHz, 1.7-3.6V, 6 GPIO, SO8N |
| U13,U14 | SN74LVC2G06DCKR | 2-ch, 1.65-V to 5.5-V inverters with open-drain outputs |
| U15 | TLV75533PDBVR | 500mA Low Dropout Voltage Regulator, Fixed Output 3.3V, SOT-23-5 |
| C1-C3,C5-C9,C14,C15,C29,C30 | 1 uF | Unpolarized capacitor, small symbol |
| C4,C18,C20,C31,C32 | 4.7 uF | Unpolarized capacitor, small symbol |
| C10,C12 | 30 pF | Unpolarized capacitor, small symbol |
| C11,C13,C19,C21-C28 | 0.1 uF | Unpolarized capacitor, small symbol |
| C16 | 0.47 uF | Unpolarized capacitor, small symbol |
| D1,D2,D4 | red LED | Light emitting diode |
| D3 | green LED | Light emitting diode |
| D7-D10 | blue LED | Light emitting diode |
| J1 | Conn_02x13P_SMD | Generic connector, double row, 02x13, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | Conn_01x04_OLED_SSD1306 | Generic connector, single row, 01x04, script generated |
| J3 | JST B10B-PHDSS-B | Generic connector, double row, 02x05, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | AARDVARK | Generic connector, double row, 02x02, counter clockwise pin numbering scheme (similar to DIP package numbering), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | Conn_ARM_JTAG_SWD_10 | CONN IDC HEADER SMD 10POS 1.27mm |
| J6 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| L3,L4 | 600R | Inductor with ferrite core, small symbol |
| R1,R2,R6,R16,R25 | 10k | Resistor, small US symbol |
| R3 | 2k | Resistor, small US symbol |
| R4,R13,R15,R17,R23,R26-R28,R33,R35,R39 | 0 | Resistor, small US symbol |
| R5,R20 | 5k1 | Resistor, small US symbol |
| R7,R8 | 4k7 | Resistor, small US symbol |
| R9,R10,R31,R32,R41-R45 | 100 | Resistor, small US symbol |
| R11,R12,R14,R22,R24,R29,R34,R36-R38,R40,R49 | 33 | Resistor, small US symbol |
| R18,R46 | 2k2 | Resistor, small US symbol |
| R21 | 12K | Resistor, small US symbol |
| R30 | 150 | Resistor, small US symbol |
| R47,R48 | 2K2 | Resistor, small US symbol |
| R50 | 1k | Resistor, small US symbol |
| SW1 | RESET | Push button switch, generic, two pins |
| SW2 | SW_Push_STM32 | Push button switch, generic, two pins |
| TP1-TP4,TP_AD1,TP_BD1,TP_BD2,TP_CD1,TP_CD2,TP_DD1-TP_DD4,TP_SWO1 | TestPoint | test point |
| Y1 | XTAL 12Mhz | Four pin crystal, GND on pins 2 and 4, small symbol |