OpenLSM
wgbowley
Low-Cost Linear Synchronous Permanent-Magnet Motor Platform
Components (47)
| Reference | Value | Description |
|---|---|---|
| Q1-Q6 | SUD90330E | N-MOSFET transistor, drain/source/gate |
| U1-U3 | IRS2104 | |
| U4 | ISO7740DWR | Reinforced 4-channel, 4/0, digital isolator |
| U5 | STM32G431K8Tx | STMicroelectronics Arm Cortex-M4 MCU, 64KB flash, 32KB RAM, 170 MHz, 1.71-3.6V, 26 GPIO, LQFP32 |
| U6 | MAX3485 | True RS-485/RS-422, 10Mbps, Slew-Rate Limited, with low-power shutdown, with receiver/driver enable, 32 receiver drive capacitity, DIP-8 and SOIC-8 |
| U7 | LD1117V33 | 800 mA Fixed Low Drop Positive Voltage Regulator (ldo). Max input 15V. Fixed Output 3.3V. TO-220-3 |
| U8 | LM2596S-5 | 5V 3A Step-Down Voltage Regulator, TO-263 |
| U9 | LM2596S-12 | 12V 3A Step-Down Voltage Regulator, TO-263 |
| U12,U13 | AMC1311 | |
| U14 | CME0512S3C | |
| U15 | CME0303S3C | |
| C1,C4,C7,C10,C11 | 1uF | Unpolarized capacitor |
| C2,C6,C9 | 10uF | Unpolarized capacitor |
| C3,C5,C8 | 100uF | Polarized capacitor |
| C12,C13 | 30pf | Unpolarized capacitor |
| C14,C15,C17,C21 | 100nf | Unpolarized capacitor |
| C16,C19 | 10uf | Unpolarized capacitor |
| C18 | 1uf | Unpolarized capacitor |
| C20 | 22uf | Unpolarized capacitor |
| C22,C24 | 680uF | Unpolarized capacitor |
| C23,C25 | 220uF | Unpolarized capacitor |
| C26 | 0.68uF | Unpolarized capacitor |
| C27 | 4.7uF | Unpolarized capacitor |
| CAN1,J1,STEP1 | 01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| D1-D15 | ES1D | Diode |
| D16 | LED | Light emitting diode |
| D17,D18 | 1N5824 | |
| FB1 | BLM18AG601SN1D | Ferrite bead |
| INT1 | 01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 33uH | Inductor |
| L2,L3 | 68uH | Inductor |
| L4 | 10uH | Inductor |
| PH1 | 01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| PRO1 | 01x06 | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1,R4,R7 | 5 | Resistor |
| R2,R3,R5,R6,R8,R9 | 47 | Resistor |
| R10 | 4.7k | Resistor |
| R11 | 120 | Resistor |
| R12,R13 | 10 | Resistor |
| R14,R15,R18 | 220 | Resistor |
| R16,R17 | 10K | Resistor |
| R19-R21 | 10mOhm | Resistor |
| R22-R24,R28-R30,R34-R36 | 0 Ohm | Resistor |
| R25-R27 | 3mOhm | Resistor |
| R31-R33 | 1mOhm | Resistor |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
| Y1 | ECS-80-20-18-TR | 8 MHz ±30ppm Crystal 20pF 100 Ohms 4-SMD, No Lead |