panelith
w531t4
PCB for Panelith FPGA Board
Components (33)
| Reference | Value | Description |
|---|---|---|
| U1 | LFE5U-85F-6BG381C | |
| U2 | IS42S16160J-6BL | SDRAM |
| U6 | FT231XS | Full Speed USB to Full Handshake UART, SSOP-20 |
| U9 | ESP32-S3-WROOM-1 | 2.4 GHz WiFi (802.11 b/g/n) and Bluetooth ® 5 (LE) module Built around ESP32S3 series of SoCs, Xtensa ® dualcore 32bit LX7 microprocessor Flash up to 16 MB, PSRAM up to 8 MB 36 GPIOs, rich set of peripherals Onboard PCB antenna |
| U10 | IS25LP128F-JBLE | |
| U11 | MPM54304GMN-0001 | Switching Voltage Regulators 4 to 16V, Quad-Output Power Module with I2C and MTP, Set output voltage with resistor divider |
| US1 | USB_C_Receptacle_USB2.0_14P | USB 2.0-only 14P Type-C Receptacle connector |
| US2 | USB4140-GF-0230-C | USB Connectors USB C Rec GF Vert 6P SMT 2.3mm TH stakes H 6.5mm |
| B0 | CK_KMS2xxGP | Microminiature SMT Side Actuated, 4.2 x 2.8 x 1.42mm, with pegs, with shield pin |
| C13-C15,C18,C21,C36,C37,C39,C40 | 22uF | |
| C16,C17,C19,C20 | 2.2uF | |
| C25-C35,C52,C53 | 22nF | |
| C38 | 1uF | |
| C60 | 220nF | |
| D0,D19,D27 | RED | Light emitting diode |
| D1 | ORANGE | |
| D8,D9 | STPS2L40A | |
| D18 | GREEN | |
| D22 | BLUE | |
| D28,D29 | 1N914 | |
| H7 | LFE5U-12F-7BG381x | ECP5 FPGA, 12K LUTs, 1.2V, BGA-381 |
| J3,J5 | 3020-16-0300-00 | CONN HEADER SMD 16POS 2.54MM |
| R3,R30,RB6 | 4.7k | |
| R9,R31-R33,R38,R56,RA4-RA6 | 15k | |
| R11,R12,R27,R28 | 10k | |
| R29,R34,R35,R40 | 1.1k | |
| R36,R37,R39,R41,R42,R62 | 549 | |
| R49,R50 | 27 | |
| R51-R54 | 5.1k | |
| RB4 | 3.3k | |
| RB5 | 18k | |
| RP4-RP7 | 0 | |
| Y1 | ECS-1612MV-250-CN-TR | Four pin crystal, GND on pins 2 and 4 |