DSAN
vlad-mod
Distributed Sensor Actuator Network
Components (31)
| Reference | Value | Description |
|---|---|---|
| Q1,Q3 | NMOS | N-MOSFET transistor, drain/source/gate |
| Q2 | AO3401A | -4.0A Id, -30V Vds, P-Channel MOSFET, SOT-23 |
| U1 | TP4056 | |
| U2 | CC1101RTK | |
| U3,U4 | AP2127K-3.3 | 300mA low dropout linear regulator, shutdown pin, 2.5V-6V input voltage, 3.3V fixed positive output, SOT-23-5 |
| U5 | STM32L053R8Tx | STMicroelectronics Arm Cortex-M0+ MCU, 64KB flash, 8KB RAM, 32 MHz, 1.65-3.6V, 51 GPIO, LQFP64 |
| C1,C4-C6,C9-C12,C15 | 10nF | |
| C2,C3,C7,C8 | 32pF | |
| C13,C14 | 0.1uf | |
| C121,C131 | 3.9pF | |
| C122 | 8.2pF | |
| C123 | 5.6pF | |
| C124,C125 | 220pF | |
| D1-D4 | LED | Light emitting diode |
| J1 | Ant. | |
| J2-J5 | Conn_01x08_Pin | Generic connector, single row, 01x08, script generated |
| J6 | Conn_01x05_Pin | Generic connector, single row, 01x05, script generated |
| J8 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J9 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| J10 | USB_C_Receptacle_USB2.0_16P | C2927039 |
| J11 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
| J12 | Conn_01x03_Pin | Generic connector, single row, 01x03, script generated |
| L121,L123,L131 | 27nH | |
| L122 | 22nH | |
| R1,R10 | 56k | Resistor |
| R2,R4,R5,R11,R12,R14,R16 | 220 | Resistor |
| R3,R6,R7 | 10k | Resistor |
| R8,R9 | 5.1k | Resistor |
| R13,R15,R17 | 1k | Resistor |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
| Y1,Y2 | XTM32027000QT00351001 | Four pin crystal, GND on pins 2 and 4 |