sbc_at91sam9g10
vd-rd
Open hardware SBC module based on AT91SAM9G10 @266MHz with max 128MB RAM
Components (45)
| Reference | Value | Description |
|---|---|---|
| U1 | AT91SAM9G10 | |
| U2,U3 | MT48LC16M16A2P | |
| U5 | AT45DB161D-SU | 16Mb Serial DataFlash, 2.5V Vcc, SOIC-8 |
| U6 | RTL8188CUS | |
| U7,U8 | TPS62A01APDDC | High Efficiency Synchronous Buck Converter with forced PWM, Adjustable Output 0.6V-5.5V, 1A, Power Good, Enable, SOT-23-6 |
| AE1 | Antenna_Shield | |
| C1,C3 | 10pF | |
| C2,C4 | 22pF | |
| C5 | 15nF | |
| C6-C14,C16-C22,C24-C27,C33,C36,C38,C39,C43-C48,C57,C914 | 100nF | |
| C15,C37,C56 | 1uF | |
| C23,C40,C58,C59 | 22uF | |
| C28 | 1.5nF | |
| C29 | 22nF | |
| C30 | 2.2nF | |
| C31,C41 | 2.2uF | |
| C32,C34 | 120pF | |
| C49,C51,C53,C54 | 47pF | |
| C50,C52 | 15pF | |
| C912,C913 | 10uF | |
| D3 | LED_BAGR | RGB LED, blue/anode/green/red |
| FID1-FID3 | Fiducial | |
| H1-H4 | MountingHole | |
| J1 | Micro_SD_Card_Det | |
| J3 | Conn_01x08 | |
| J4 | Conn_02x18_Odd_Even | |
| J5 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| L2,L3 | 1uH | |
| R1 | 2k | |
| R2,R3,R10,R28-R31 | 100k | |
| R4,R6,R7 | 180 | |
| R5 | 1.5k | |
| R8,R9 | 10k | |
| R11-R16 | 39 | |
| R17-R21 | 15k | |
| R22 | 22k | |
| R24,R26 | 5.1K | Resistor, small symbol |
| R25 | 2.2K | Resistor, small symbol |
| R27 | 453k | |
| SW1,SW2 | SW_Push | |
| TP4 | Vbus | |
| TP5 | Vcore | |
| TP6 | Vio | |
| Y1 | 18.432MHz | |
| Y2 | 32.768kHz |