Loading design…
v206645
| Reference | Value | Description |
|---|---|---|
| Q1-Q3 | 2N2222 | 100mA Ic, 50V Vce, Epitaxial Silicon NPN Transistor, TO-92 |
| Q4 | BSS110 | -0.18A Id, -45V Vds, P-Channel MOSFET, TO-92 |
| U1,U2,U5 | TL071 | Single Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8 |
| U3 | INA122 | Precision, Low Power Instrumentation Amplifier G = 1 + 50kOhm/Rg, DIP-8/SOIC-8 |
| U4 | ADS1115IDGS | Ultra-Small, Low-Power, I2C-Compatible, 860-SPS, 16-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator, VSSOP-10 |
| U7 | LTC1044 | Switched Capacitor Voltage Converter, 1.5V to 9V supply operation, 200uA Max No Load Supply Current at 5V, DIP-8/TO-99 |
| A1 | RaspberryPi_Pico | Versatile and inexpensive microcontroller module powered by RP2040 dual-core Arm Cortex-M0+ processor up to 133 MHz, 264kB SRAM, 2MB QSPI flash; also supports Raspberry Pi Pico 2 |
| CF+1,Cf-1,Cfmos1 | 100μF | Polarized capacitor |
|---|
| Cf1,Cf2 | 100uF | Polarized capacitor |
|---|
| Cfin1,Cfin2,Cfout1 | 1μF | Polarized capacitor |
|---|
| Cv1 | 10μF | Polarized capacitor |
|---|
| DS1 | WC1602A | LCD 16x2 Alphanumeric , 8 bit parallel bus, 5V VDD |
|---|
| Furo1-Furo5,Furo7-Furo9 | 0 | Resistor |
|---|
| J1 | Sensor HALL | Generic connector, single row, 01x04, script generated |
|---|
| J2 | Jumper fonte | Generic connector, single row, 01x02, script generated |
|---|
| J3 | Fonte_5V | DC Barrel Jack with a mounting pin |
|---|
| K1-K3 | SANYOU_SRD_Form_C | Sanyo SRD relay, Single Pole Miniature Power Relay, |
|---|
| Rf+1,Rf-1,Rfmos1,Rs-1,Rs-2,RV1,RV2 | 10k | Resistor,Trim-potentiometer |
|---|
| Rfin1,Rfin2,Rfout1,RQ1-RQ3 | 1k | Resistor |
|---|
| RG1k1 | 200 | Resistor |
|---|
| RG10 | 40k | Resistor |
|---|
| RG10k1 | 20 | Resistor |
|---|
| RG100 | 2k | Resistor |
|---|
| RLED1 | 220 | Resistor |
|---|
| Rp1 | 100k | Resistor |
|---|
| Rs-4 | 1M | Resistor |
|---|
| Rsh1 | 10 | Resistor |
|---|