starter-micromouse
uqmars
Components (23)
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | SL2301S | P-MOSFET transistor, drain/source/gate |
| U1,U2 | DRV8210DRLR | |
| A2 | RaspberryPi_Pico | Versatile and inexpensive microcontroller module powered by RP2040 dual-core Arm Cortex-M0+ processor up to 133 MHz, 264kB SRAM, 2MB QSPI flash; also supports Raspberry Pi Pico 2 |
| C1,C6,C7 | 100nf | Unpolarized capacitor |
| C2,C3 | 2.2uf | Polarized capacitor |
| C4 | 1uf | Polarized capacitor |
| C5 | 10uf | Polarized capacitor |
| D1,D2 | LED | Light emitting diode |
| D3 | DSK24 | Schottky diode |
| J1 | IR3 | Generic connector, single row, 01x03, script generated |
| J2,J3 | Conn_01x06_Socket | Generic connector, single row, 01x06, script generated |
| J4 | Conn_01x02_Socket | Generic connector, single row, 01x02, script generated |
| J5 | IR2 | Generic connector, single row, 01x03, script generated |
| J6 | IR1 | Generic connector, single row, 01x03, script generated |
| J7 | Conn_01x06_Pin | Generic connector, single row, 01x06, script generated |
| J8 | Conn_02x05_Odd_Even | Generic connector, double row, 02x05, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J9 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| R1,R2 | 330R | Resistor |
| R3,R7 | 10K | Resistor |
| R4 | 100K | Resistor |
| SW1,SW3 | SW_MEC_5E | MEC 5E single pole normally-open tactile switch |
| SW2 | SW_SPDT | Switch, single pole double throw |
| TP1,TP2 | TestPoint | test point |