Loading design…
tuckertwo
Reverse-engineered documentation and code for surplus Cubic/NextBus LED platform signs
| Reference | Value | Description |
|---|---|---|
| U101 | ESP32-C3-WROOM-02U-N4 | 802.11 b/g/n WiFi and Bluetooth 5 module, ESP32C3 SoC, RISCV microprocessor, On-board antenna |
| U102 | D78B33-0.5 | 6.5-36 VDC to 3.3 VDC @ 500 mA buck converter module |
| U103 | MAX3485 | True RS-485/RS-422, 10Mbps, Slew-Rate Limited, with low-power shutdown, with receiver/driver enable, 32 receiver drive capacitity, DIP-8 and SOIC-8 |
| U201 | 74HC595 | 8-bit serial in/out Shift Register 3-State Outputs |
| A101 | ENC28J60_Module | SPI Ethernet adapter module |
| C101 | 100 nF | Unpolarized capacitor |
| C102 | 10 µF/50 V | Unpolarized capacitor |
| C103 | 22 µF / 10 V | Unpolarized capacitor |
| C104,C201 | C | Unpolarized capacitor |
| D101,D201,D202,D301-D312 | 1N4148 | 100V 0.15A standard switching diode, DO-35 |
| J101 | SameSky PJ-002A | DC Barrel Jack with an internal switch |
| J102 | USB_B | USB Type B connector |
| J103,J202 | TE 640456-4 |
| Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J104,J105 | Conn_01x09_Pin | Generic connector, single row, 01x09, script generated |
|---|
| J201 | TE 640456-2 | Generic connector, single row, 01x02, script generated |
|---|
| J203 | 2x7 Conn to Dak matrix | Generic connector, double row, 02x07, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J204 | Molex 0026604020 | Generic connector, single row, 01x02, script generated |
|---|
| R101 | 10 kΩ | Resistor, US symbol |
|---|
| R102 | 120 Ω | Resistor, US symbol |
|---|
| R201 | 1 kΩ | Resistor, US symbol |
|---|
| SW301 | SW_DIP_x08 | 8x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |
|---|
| SW302,SW303 | TL2202OAYA | Momentary Switch, dual pole double throw |
|---|
| SW304,SW305 | TL2022OAYA | Momentary Switch, dual pole double throw |
|---|