BuggyIMU_PCBA
tomo900
Components (19)
| Reference | Value | Description |
|---|---|---|
| U1 | ESP32-S3-MINI-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, SMD, onboard antenna |
| U3 | LSM6DSM | I2C/SPI, iNEMO inertial module: always-on 3D accelerometer and 3D gyroscope, with auxiliary SPI, 1.71V to 3.6V VCC |
| U4 | LP38693MP-3.3 | 500-mA Low-Dropout CMOS Linear Regulators Stable With Ceramic Output Capacitors, 3.3V output voltage, Enable Pin, SOT-223 |
| U5 | LPS22HB | MEMS nano pressure sensor, 260-1260 hPa, absolute digital output baromeeter, 24 bit, SPI, I2C, 0.0075 hPa noise rms, ST_HLGA-10L |
| U6 | LIS2MDL | Ultra-low-power, 3-axis digital output magnetometer, LGA-12 |
| C1,C10,C11,C14,C15 | 1u | Unpolarized capacitor |
| C2-C6,C9,C19 | 0u1 | Unpolarized capacitor |
| C12,C13 | 10u | Unpolarized capacitor |
| D1,D5 | 1N4148W | 75V 0.15A Fast Switching Diode, SOD-123 |
| D2-D4 | 5V | Bidirectional transient-voltage-suppression diode |
| D6 | LED | Light emitting diode |
| J1 | Conn_02x09_Odd_Even | Generic connector, double row, 02x09, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | Micro_SD_Card | Micro SD Card Socket |
| J4 | USB_B_Micro | USB Micro Type B connector |
| R1-R3,R7-R10,R20-R22 | 4k7 | Resistor, US symbol |
| R6 | 240R | Resistor, US symbol |
| R31 | DNP | Resistor, US symbol |
| SW1 | SW_Push | Push button switch, generic, two pins |
| TP1,TP3-TP7 | TestPoint | test point |