raspberry-pi-power-hub
tobycm
one port (usb c) to rule them all!!!
Components (29)
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | AOD409-HXY | |
| Q3 | NPN | Bipolar transistor symbol for simulation only, substrate tied to the emitter |
| U1 | W25Q32JVSS | 32Mbit / 4MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 (208 mil) |
| U3 | ABM8-272-T3_C20625731 | |
| U4 | RP2040 | A microcontroller by Raspberry Pi |
| U5 | AP63203WU-7 | |
| U6 | CYPD3177-24LQ | Stand-alone USB PD controller (with sink Auto-run mode), QFN-24 |
| U7 | GT-USB-7010AN | |
| C1,C2,C4-C9,C11,C14,C18,C19 | 100nF | Unpolarized capacitor, small symbol |
| C3,C10,C20,C21,C23,C24 | 1uF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C12,C13 | 18pF | Unpolarized capacitor, small symbol |
| C15 | 10uF | Unpolarized capacitor, small symbol |
| C16,C17 | 22uF | Unpolarized capacitor, small symbol |
| C22 | 4.7uF | Unpolarized capacitor |
| D1,D2 | Green | Light emitting diode, small symbol |
| D3,D4 | Amber | Light emitting diode, small symbol |
| D5,D6,D11 | Red | Light emitting diode,Light emitting diode, small symbol |
| D9,D10 | D_Zener | Zener diode |
| J1 | Conn_02x04_Counter_Clockwise | Generic connector, double row, 02x04, counter clockwise pin numbering scheme (similar to DIP package numbering), script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 4.7uH | Inductor, small symbol |
| R3,R4 | 27 | Resistor, small symbol |
| R5,R10,R15,R20,R21 | 1k | Resistor,Resistor, small symbol |
| R8,R9,R11-R14,R22 | 470 | Resistor,Resistor, small symbol |
| R16 | 4.7k | Resistor |
| R17 | 10k | Resistor |
| R18 | 49.9k | Resistor |
| R19 | 5.1k | Resistor |
| SW1-SW3 | TS24CA | |
| TP1-TP23 | TestPoint | test point |