Teensy_modelling_amp
tmr-fern
This project was done as my thesis to obtain my master's degree in Electronics Engineering. The proposed system aims to adapt a model to match the frequency and distortion characteristics of guitar amplifiers.
Components (21)
| Reference | Value | Description |
|---|---|---|
| IC1 | AP7313-30SRG-7 | Linear Voltage Regulator IC Positive Fixed 1 Output 150mA SOT23R |
| U1 | SGTL5000XNLA3 | Low Power Stereo Codec with Headphone Amp, QFN-20 |
| A1 | TEENSY_4.1 | |
| C1,C5,C8,C12-C14,C17-C21 | 0.1u | Unpolarized capacitor |
| C2,C4,C6,C9-C11,C15,C16 | 2.2u | Unpolarized capacitor |
| C3 | 0.15u | Unpolarized capacitor |
| C7 | 10u | Unpolarized capacitor |
| FB1 | FerriteBead | Ferrite bead |
| J1 | Jack_HP | Audio Jack, 3 Poles (Stereo / TRS) |
| J2 | Jack_Mic | Audio Jack, 2 Poles (Mono / TS) |
| J3 | Pins_Line_out | Generic connector, single row, 01x03, script generated |
| J4 | Pins_Line_in | Generic connector, single row, 01x03, script generated |
| J5 | Pins_Power | Generic connector, single row, 01x02, script generated |
| J6 | Pins_HP | Generic connector, single row, 01x03, script generated |
| J7 | Jack_Line_in | Audio Jack, 3 Poles (Stereo / TRS) |
| J9 | Pins_Mic | Generic connector, single row, 01x02, script generated |
| J10 | Jack_line_out | Audio Jack, 3 Poles (Stereo / TRS) |
| R1,R4,R5 | 2.2k | Resistor |
| R2 | 100 | Resistor |
| RV1-RV4 | 25k | Potentiometer |
| SW1,SW2 | SW_SPST |