Loading design…
tixlegeek
The CoolKid'sBadge is a convention electronic badge created for the LeHack2024 Cyber-security convention in Paris(Fr) (not affiliated), containing an ESP32S3 with 16Mb Flash, a NRF24L01 Slot, and a FlipperZero interface, and much more!
| Reference | Value | Description |
|---|---|---|
| Q1,Q3 | MMDT2907A | 200mA IC, 40V Vce, Dual PNP/PNP Transistors, SOT-363 |
| Q2,Q4 | DMP1045U | -4.4A Id, -40V Vds, P-Channel MOSFET, SOT-23 |
| Q5 | UMH3N | 0.1A Ic, 50V Vce, Dual NPN Input Resistor Transistors, SOT-363 |
| U1 | ESP32-S3-WROOM-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| U2 | NRF24L01_SMD | Ultra low power 2.4GHz RF Transceiver, Carrier PCB |
| U3 | AMS1117-3.3 |
| 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U4 | CH340C | USB serial converter, UART, SOIC-16 |
|---|
| C1-C4,C6-C14 | 100nF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
|---|
| C5 | 10uF | Unpolarized capacitor, small symbol |
|---|
| D1 | PRTR5V0U2X | Ultra low capacitance double rail-to-rail ESD protection diode, SOT-143 |
|---|
| FZ1 | FLIPPER ZERO |
|---|
| IO1 | IO1 | test point |
|---|
| IO2 | IO2 | test point |
|---|
| IO3 | IO3 | test point |
|---|
| IO4 | IO4 | test point |
|---|
| IO5 | IO5 | test point |
|---|
| IO6 | IO6 | test point |
|---|
| IO7 | IO7 | test point |
|---|
| IO8 | IO8 | test point |
|---|
| IO9 | IO9 | test point |
|---|
| IO10 | IO10 | test point |
|---|
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
|---|
| J4 | Conn_01x08_Pin | Generic connector, single row, 01x08, script generated |
|---|
| J5 | Conn_01x10_Pin | Generic connector, single row, 01x10, script generated |
|---|
| JP1-JP6 | Jumper_2_Small_Bridged | Jumper, 2-pole, small symbol, bridged |
|---|
| R1-R4 | 100k | Resistor, small symbol |
|---|
| R5,R6 | 5k1 | Resistor, small symbol |
|---|
| R7,R8 | 22 | Resistor, small symbol |
|---|
| R9 | 10k | Resistor, small symbol |
|---|
| SK1-SK7 | SK6805SIDE-D |
|---|
| SW1 | BOOT | Push button switch, generic, two pins |
|---|
| SW2 | RESET | Push button switch, generic, two pins |
|---|
| TP1 | 3.3V | test point |
|---|
| TP2 | 5V | test point |
|---|
| TP3,TP6,TP12 | GND | test point |
|---|
| TP4 | ESP_SCL | test point |
|---|
| TP5 | ESP_SDA | test point |
|---|
| TP7 | ESP_MOSI | test point |
|---|
| TP8 | ESP_MISO | test point |
|---|
| TP9 | ESP_SCK | test point |
|---|
| TP10 | FZ_SDA | test point |
|---|
| TP11 | FZ_SCL | test point |
|---|