Loading design…
thePunderWoman
The controllers built to work with Amidala
| Reference | Value | Description |
|---|---|---|
| Q_LATCH1 | 2N7002 | N-MOSFET transistor, gate/source/drain |
| Q_PWR1 | DMG2305UX | P-MOSFET transistor, gate/source/drain |
| U_BUCK1 | TLV62569 | High Efficiency Synchronous Buck Converter, Adjustable Output 0.6V-5.5V, 2A, SOT-23-5 |
| U_CHG1 | bq25185 | 1-cell, 1-A stand-alone linear battery charger with power path and solar input support |
| U_MCU1 | ESP32-S3-WROOM-1-N8 | WiFi/BT module, integrated flash+crystal+antenna, ESP32-S3 (Xtensa dual-core, native USB) |
| U_OLED1 | JST-SH_4Pin_OLED | Generic 4-pin I2C SSD1306 OLED breakout module (VCC, GND, SCL, SDA). Hand-authored project-local symbol, no vendor-specific pinout assumed. |
| BT1 | JST-PH_2Pin_Battery | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| C_3V3_1,C_BAT1,C_BUCK_IN1,C_OLED_1,C_SYS_1,C_VIN_1,C_XBEE_VCC4 | 10µF | Unpolarized capacitor |
| C_3V3_2,C_DBNC1,C_HALL1,C_OLED_2,C_RGB1,C_STICK1,C_SYS_2,C_VIN_2,C_XBEE_RC1,C_XBEE_VCC1 | 100nF | Unpolarized capacitor |
| C_3V3_3 | 39pF | Unpolarized capacitor |
| C_BUCK_OUT1 | 22µF | Unpolarized capacitor |
| C_XBEE_VCC2 | 1µF | Unpolarized capacitor |
| C_XBEE_VCC3 | 47pF | Unpolarized capacitor |
| D_OR1,D_OR2 | 1N4148W | Diode, small symbol |
| D_RGB1 | SK6812MINI-E | RGB LED with integrated controller |
| D_VBUS_TVS1 | PESD5V0S1BA | Bidirectional transient-voltage-suppression diode |
| J_USB1 | USB-C | USB 2.0-only 16P Type-C Receptacle connector |
| L_BUCK1 | 2.2µH | Inductor |
| R_BOOT_PU1,R_EN_PU1,R_LATCH_G1,R_STAT1,R_STAT2,R_TS1,R_XBEE_ATTN_PU1,R_XBEE_RST1 | 10kΩ | Resistor |
| R_BTN_PU1,R_GATE1,R_PWR_SENSE1,R_VSYS2 | 100kΩ | Resistor |
| R_CC1,R_CC2 | 5.1kΩ | Resistor |
| R_FB1 | 255kΩ | Resistor |
| R_FB2 | 56.2kΩ | Resistor |
| R_ISET1 | 604Ω | Resistor |
| R_RGB1 | 470Ω | Resistor |
| R_USB_DM1,R_USB_DP1 | 27Ω | Resistor |
| R_VSET1 | 18kΩ | Resistor |
| R_VSYS1 | 200kΩ | Resistor |
| R_XBEE_RC1 | 100Ω | Resistor |
| SW_BOOT1 | Panasonic_EVQP2 | Push button switch, generic, two pins |
| SW_MACRO1-SW_MACRO6 | 6x6x5mm SMD Tactile | Push button switch, generic, two pins |
| SW_PWR1,SW_THR_DN1,SW_THR_UP1,SW_TRIG_DIG1,SW_VOL_DN1,SW_VOL_UP1 | Alps_SKRTLAE010 | Push button switch, generic, two pins |