Meteoroid
techy-robot
Production-ready 3d printer based on a Ender 5 frame, with multifunction tool changing.
Components (21)
| Reference | Value | Description |
|---|---|---|
| U2 | AP63203WU | 2A, 1.1MHz Buck DC/DC Converter, fixed 3.3V output voltage, TSOT-23-6 |
| U5 | THVD1420DRLR | Half duplex RS-485/RS-422, 12 Mbps, 3V - 5.5V supply, ±12kV electro-static discharge (ESD) protection, with receiver/driver enable, 32 receiver drive capacity, SOIC-8 |
| U6 | CH32X035G8U6 | |
| C7 | 10uF, 16v | Unpolarized capacitor |
| C25,C40 | 100nF, 16v | Unpolarized capacitor, small symbol |
| C26 | 4.7uF, 16v | Unpolarized capacitor, small symbol |
| C27 | 22uf, 16v CL31A226MOCLNN | Unpolarized capacitor, small symbol |
| C28 | 22uf, 32v | Unpolarized capacitor, small symbol |
| D2,D3 | GSDH3005 | Schottky diode |
| D4 | 2.6~3.1 Fv Green 5ma | Light emitting diode |
| D11 | CDDFN10-3324P | BOURNS - CDDFN10-3324P - DIODE, ESD PROTECTION, 3.3V, 0.45PF |
| J1,J3,J6,J7 | Keystone 3579 | Generic connector, single row, 01x01, script generated |
| J4,J5,J8,J9 | Keystone 3569 | Generic connector, single row, 01x01, script generated |
| J10 | G-Switch-GT-USB-7025 | USB 2.0-only 16P Type-C Receptacle connector |
| J11 | 1.27mm 4 pin socket | Generic connector, single row, 01x04, script generated |
| L3 | 2.2uH, WIP322512A-2R2MLDG | Inductor |
| R2 | 2ohm | Resistor |