Loading design…
syamei0
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | 2SC2712 | Bipolar transistor symbol for simulation only, substrate tied to the emitter |
| U1 | ESP32-WROOM-32E | RF Module, ESP32-D0WD-V3 SoC, without PSRAM, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 2.7-3.6V, onboard antenna, SMD |
| U2 | CH217K | |
| U3 | AZ1117CH-3_3TRG1 | IC REG LINEAR 3.3V 800MA SOT223 |
| U4 | ATA6561 | |
| U5 | CH340K | USB serial converter, UART, SSOP-10 |
| C1-C3,C6 | 0.1μF | Unpolarized capacitor |
| C4 | 2.2μF | Unpolarized capacitor |
| C5 | 0.33μF | Unpolarized capacitor |
| C7 | 22μF | Unpolarized capacitor |
| C8,C9 | 100nF | Unpolarized capacitor |
| D1-D28 | LED | Light emitting diode |
| J1 | POWER(5V) | Generic connector, single row, 01x02, script generated |
| J2 | I2C | Generic connector, single row, 01x02, script generated |
| J3 | FT234X | Generic connector, single row, 01x04, script generated |
| J4 | Dsub-9 | Generic connector, single row, 01x09, script generated |
| J5-J8,J11,J13,J14 | Conn_01x02_Socket | Generic connector, single row, 01x02, script generated |
| J9,J10,J12,J15,J17,J22-J24 | Conn_01x03_Socket | Generic connector, single row, 01x03, script generated |
| J16,J28 | Conn_01x16_Socket | Generic connector, single row, 01x16, script generated |
| J25,J27 | RJ45_Shielded | RJ connector, 8P8C (8 positions 8 connected), Shielded |
| J26 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| JP3,JP4 | Jumper_2_Open | Jumper, 2-pole, open |
| LS1 | PKM13EPYH4000-A0 | Speaker |
| R1-R29,R35,R36 | 10kΩ | Resistor |
| R30 | 240Ω | Resistor |
| R31 | 50kΩ | Resistor |
| R32,R38-R40 | pullup | Resistor |
| R33,R34 | 5.1kΩ | Resistor |
| R37 | 120Ω | Resistor |
| SW2 | BOOT | Single Pole Single Throw (SPST) switch, separate symbol |
| SW3 | EN | Single Pole Single Throw (SPST) switch, separate symbol |
| SW4 | SW_Push_DPDT | Momentary Switch, dual pole double throw |