Loading design…
syamei0
| Reference | Value | Description |
|---|---|---|
| U1 | ESP32-C3-WROOM-02 | 802.11 b/g/n WiFi and Bluetooth 5 module, ESP32C3 SoC, RISCV microprocessor, On-board antenna |
| U2 | LM1117GS-3.3 | 800mA Low-Dropout Linear Regulator, 1.8V fixed output, TO-252 |
| U3-U6 | AM2837 | |
| C1,C2 | 10u | Unpolarized capacitor |
| C3-C10,C12,C15,C16,C18,C19 | 0.1μF | Unpolarized capacitor |
| C11,C13,C14,C17 | 220uF | Polarized capacitor |
| D1 | LED | Light emitting diode |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J2,J3 | Conn_01x10_Socket | Generic connector, single row, 01x10, script generated |
| J4 | BAT_XH | Generic connector, single row, 01x02, script generated |
| J5 | RJ45_Shielded | RJ connector, 8P8C (8 positions 8 connected), Shielded |
| J6-J10,J15-J17 | Conn_01x03_Pin | Generic connector, single row, 01x03, script generated |
| J11,J14,J18,J20,J23,J26,J27 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| J12,J13 | Jumper_pin | Generic connector, single row, 01x02, script generated |
| J19,J21,J22,J24,J25 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
| R1,R2 | 5.1k | Resistor |
| R3 | 10k | Resistor |
| R4 | 120Ω | Resistor |
| R5 | 10kΩ | Resistor |
| SW1,SW3 | SW_Push | Push button switch, generic, two pins |
| SW2 | SW_Push_DPDT | Momentary Switch, dual pole double throw |