Loading design…
syamei0
| Reference | Value | Description |
|---|---|---|
| U1 | ESP32-S3-WROOM-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| U2 | LM1117GS-3.3 | 800mA Low-Dropout Linear Regulator, 3.3V fixed output, TO-252 |
| U3 | CH217K | |
| C1,C3-C6 | 0.1μF | Unpolarized capacitor |
| C2 | 22μF | Unpolarized capacitor |
| C7 | 220uf | Polarized capacitor |
| D1-D38 | LED | Light emitting diode |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J6 | Conn_01x04_Socket | Generic connector, single row, 01x04, script generated |
| J7 | Conn_01x02_Socket | Generic connector, single row, 01x02, script generated |
| J8,J33 | RJ45_Shielded | RJ connector, 8P8C (8 positions 8 connected), Shielded |
| J9-J11,J14,J15,J17,J24-J26,J28-J31 | Conn_01x03_Socket | Generic connector, single row, 01x03, script generated |
| J13,J16 | Jumper_pin | Generic connector, single row, 01x02, script generated |
| J18,J19 | Conn_01x05_Socket | Generic connector, single row, 01x05, script generated |
| J27,J35-J39 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| LS1 | Speaker | Speaker |
| R1 | 22kΩ | Resistor |
| R2,R3,R6-R8,R11,R12,R14,R18-R57,R59-R62 | 10kΩ | Resistor |
| R4 | 120Ω | Resistor |
| R5,R9 | 5.1kΩ | Resistor |
| R17 | 240Ω | Resistor |
| SW1,SW3 | SW_Push | Push button switch, generic, two pins |
| SW2 | SW_Push_DPDT | Momentary Switch, dual pole double throw |