pcb-dev
sundevilmotorsports
PCB development repository
Components (29)
| Reference | Value | Description |
|---|---|---|
| IC1 | STM32H743VIT6 | ARM Microcontrollers - MCU High-performance and DSP with DP-FPU, ARM Cortex-M7 MCU with 2MBytes Flash, 1MB RAM, 400 MHz CPU, Art Accelerator, L1 cache, external memory interface, large set of peripherals |
| IC2 | 74LVC1G17SE-7 | DiodesZetex 74LVC1G17SE-7, Buffer, Push-Pull, Non-Inverting, 1.65 5.5 V, 5-Pin SOT-353 |
| IC3 | TLP175A_TPL,E | MOSFET Output Optocouplers Trigger LED Current 1mA85dC3750 Vrms |
| IC4 | SN65HVD230QDR | 3.3-V CAN Transceiver with Standby Mode |
| IC6 | MIC37100-3.3WS | LDO Voltage Regulators 1.0A Low Voltage uCap LDO Regulator |
| IC7 | TPS2116DRLR | d |
| U1 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| C1,C4,C6-C10,C14,C16,C21 | 100nF | |
| C2,C3 | 6pF | |
| C5,C15 | 2.2uF | |
| C11,C13,C20 | 1uF | |
| C17,C18 | 10uF | |
| C19 | 4.7uF | |
| D1 | ESDCAN03-2BWY | ESD Suppressors / TVS Diodes Automotive dual-line Transil, Transient voltage suppressor (TVS) for CAN bus |
| FL1 | EMIF06-MSD02N16 | 6-Line EMI filter&ESD for SD card uQFN16 STMicroelectronics EMIF06-MSD02N16, EMI Filter & ESD Protector |
| H1,H2 | M3 | |
| J1 | 104031-0811 | microSD 1.10mm SMT push-pull memory card microSD 1.10mm SMT push-pull memory card |
| J3 | USB_B_Micro | USB Micro Type B connector |
| J4-J6 | SM04B-ULHK-1TA1-ETB_HF_ | Automotive Connectors 4P ULH Series 0.50 SMT Side Entry Header Key 1 Tin Black |
| JP1 | BOOT | |
| LED1 | 150060GS75000 | Wurth Elektronik WL-SMCW 520 nm Green LED, 1608 (0603) Clear SMD package |
| LED2,LED3 | 150060RS75000 | WURTH ELEKTRONIK - 150060RS75000 - LED, 0603, RED, 250MCD, 625NM |
| R1,R7,R12,R14 | 10k | |
| R2 | 120 | |
| R3,R8 | 0 | |
| R4 | 5.05 | |
| R5,R6 | 27 | |
| R11,R13 | 68 | |
| Y1 | ABM3B-8.000MHZ-10-1-U-T | 8 MHz +/-10ppm Crystal 10pF 200 Ohms 4-SMD, No Lead |