Loading design…
sundevilmotorsports
PCB development repository
| Reference | Value | Description |
|---|---|---|
| IC1 | ESP32-S3-WROOM-1-N8R8 | WiFi Modules - 802.11 (Engineering Samples Only) SMD Module, ESP32-S3R8 with 8 MB Octal PSRAM Die, 8 MB Quad SPI flash, PCB Antenna |
| IC2 | NEO-F9P-15B | GNSS / GPS Modules u-blox F9 dual band L1/L5 GNSS module high precision Professional Grade LGA, 16x12 mm |
| IC3 | MIC37100-3.3WS | LDO Voltage Regulators 1.0A Low Voltage uCap LDO Regulator |
| IC5 | TPS563211DRLR | Switching Voltage Regulators 4.2-V to 18-V, 3-A, synchronous buck converter with 1% accuracy, PG/SS and PFM/forced-PWM in SOT583 |
| IC6 | CP2102N-A02-GQFN28 | SILICON LABS - CP2102N-A02-GQFN28 - USB TO UART BRIDGE, -40 TO 85DEG C |
| Q1,Q2 | SOT96P237X111-3N |
| U1 | INA260 | Current/power/voltage monitor with Integrated 2mΩ Shunt Resistor, 2.7V - 5.5V, I2C, TSSOP-16 |
|---|
| U2 | TPS2116DRL | 2 Channnels Power Mux with Manual and Priority Switchover, 1.6-5.5V Input Voltage, 2.5A Output Current, Ron 40 mOhm, SOT-583-8 |
|---|
| U3 | ADR425BRZ |
|---|
| U4 | SN65HVD230 | CAN Bus Transceivers, 3.3V, 1Mbps, Low-Power capabilities, SOIC-8 |
|---|
| U5-U7 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
|---|
| U8 | TPS2116 |
|---|
| U9 | ST_EMIF06-MSD02N16 |
|---|
| U11 | ADC128S102 |
|---|
| AE1 | UFL |
|---|
| C13,C21,C23,C25,C26,C28,C29,C38,C41,C43-C45 | 100nF |
|---|
| C20,C36,C40,R20 | 10uF |
|---|
| C22,C30,C31 | 22uF |
|---|
| C24 | 47uF |
|---|
| C27,C32,C33,C35,C37,C39,C42,C46 | 1uF |
|---|
| C34 | 100uF |
|---|
| D2 | ESDCAN03-2BWY | ESD Suppressors / TVS Diodes Automotive dual-line Transil, Transient voltage suppressor (TVS) for CAN bus |
|---|
| D6-D13 | TVS |
|---|
| J1 | USB_B | USB Type B connector |
|---|
| J2,J5 | USB_B_Micro | USB Micro Type B connector |
|---|
| J3,J6 | 1-776087-4 |
|---|
| J4 | Molex_1040310811 |
|---|
| K1 | IMB03IGR | Body Features: Insulation Special Features 2500V Initial Surge Withstand Voltage between Contacts & Coil | Product Weight .75 G | Product Weight .026 OZ | Contact Features: Contact Base Material AgNi | Contact Plating Material Gold | Contact Special Features Single Contact | Contact Current Class 0 2 AMP | Contact Number of Poles 1 | Contact Current Rating (Max) 2 AMP | Contact Arrangement 1 Form A (NO) | Dimensions: Product Width .236 INCH | Product Width 6 MM | Product Length 10 MM | Height Class (Mec |
|---|
| L1 | 4.7uH |
|---|
| L2 | 27nH |
|---|
| LED1-LED3 | RED | LED Circuit Board Indicator LED Circuit Board Indicator Single Red Diffused, Tinted 2V 20mA Round with Domed Top 5mm, T-1 3/4 Through Hole, Right Angle |
|---|
| LED4 | GREEN | LED Circuit Board Indicator LED Circuit Board Indicator Single Red Diffused, Tinted 2V 20mA Round with Domed Top 5mm, T-1 3/4 Through Hole, Right Angle |
|---|
| R6,R16 | 220 |
|---|
| R7-R9,R11-R15,R17,R22,R28,R29 | 10k |
|---|
| R10 | 74.1k |
|---|
| R18,R19 | 330uF |
|---|
| R21 | 120 |
|---|
| R25 | 1k |
|---|
| R26 | 22.1K |
|---|
| R27 | 47.5K |
|---|
| TP1 | GND | test point |
|---|
| TP2 | SMPS_OUT | test point |
|---|
| TP3 | ST_5V | test point |
|---|
| TP4 | ST_5VA |
|---|
| TP5 | Reset | test point |
|---|
| TP6 | Safeboot | test point |
|---|
| Y2 | ECX-.327-CDX-2096 | Crystals CRYSTAL 32.768 kHZ 12.5 PF SMD, ESR 50K Ohms, +/-5ppm Tolerance -40 C +85 C, 3.2 x 1.5 uw Max +/- 3 ppm 1st Year Aging Max |
|---|