Loading design…
sundevilmotorsports
PCB development repository
| Reference | Value | Description |
|---|---|---|
| IC1 | ESP32-S3-WROOM-1-N8R8 | WiFi Modules - 802.11 (Engineering Samples Only) SMD Module, ESP32-S3R8 with 8 MB Octal PSRAM Die, 8 MB Quad SPI flash, PCB Antenna |
| IC2 | ISM330DHCXTR | IMUs - Inertial Measurement Units VFLGA2.5X3X.86 14L P.5 L.475X.25 |
| IC3 | CP2102N-A02-GQFN28 | SILICON LABS - CP2102N-A02-GQFN28 - USB TO UART BRIDGE, -40 TO 85DEG C |
| IC4 | TPS259250DRCR | 5V, 5A, 30m eFuse with Adjustable +/-15% Accurate Current Limit |
| IC5 | MIC37100-3.3WS | LDO Voltage Regulators 1.0A Low Voltage uCap LDO Regulator |
| IC6 | TPS2116DRLR | d |
| IC7 |
| MOSFET Output Optocouplers Trigger LED Current 1mA85dC3750 Vrms |
| Q1,Q2 | MMBT2222LT1G | Bipolar transistor symbol for simulation only, substrate tied to the emitter |
|---|
| U1 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
|---|
| U2 | SN65HVD230 | CAN Bus Transceivers, 3.3V, 1Mbps, Low-Power capabilities, SOIC-8 |
|---|
| C1,C13,C14 | 10uF |
|---|
| C2,C4,C6,C7,C9,C10 | 100nF |
|---|
| C3,C8,C11,C12,C15 | 1uF |
|---|
| C5 | 4.7uF |
|---|
| D1 | ESDCAN03-2BWY | ESD Suppressors / TVS Diodes Automotive dual-line Transil, Transient voltage suppressor (TVS) for CAN bus |
|---|
| H1-H4 | M3 |
|---|
| J1 | Conn_01x04_Socket | Generic connector, single row, 01x04, script generated |
|---|
| J2 | USB_B_Micro | USB Micro Type B connector |
|---|
| LED1 | 150060GS75000 | 2.4 V Green LED 1608 (0603) SMD, Wurth Elektronik WL-SMCW 150060VS75000 |
|---|
| LED2 | 150060RS75000 | WURTH ELEKTRONIK - 150060RS75000 - LED, 0603, RED, 250MCD, 625NM |
|---|
| R1-R3,R12,R13,R17,R19 | 10k |
|---|
| R4,R5 | 2.2k |
|---|
| R6,R7 | 27 |
|---|
| R8 | 5.05 |
|---|
| R9 | 22.1k |
|---|
| R10 | 1k |
|---|
| R11 | 47.5k |
|---|
| R14 | 60.4k |
|---|
| R15 | 1M |
|---|
| R16 | 120 |
|---|
| R18 | 68 |
|---|
| R20 | 0 |
|---|
| TP1 | 5V_ST | test point |
|---|