SparkFun_Qwiic_GNSS_SAM-M8Q
sparkfun
A compact breakout board for the power SAM-M8Q GNSS receiver from u-blox.
Components (32)
| Reference | Value | Description |
|---|---|---|
| U1 | SAM-M8Q | GPS ublox M8 variant |
| U4 | CH340E | USB serial converter, UART, MSOP-10 |
| U6 | RT9080-3.3 | 600mA low dropout linear regulator, with enable pin, 3.8V-6V input voltage range, 3.3V fixed positive output, SOT-23-5 |
| BT1 | ML414H | Reflowable coin cell battery |
| C1,C9 | 1.0uF | Unpolarized capacitor |
| C10 | 10uF | Unpolarized capacitor |
| C11,C14 | 0.1uF | Unpolarized capacitor |
| D1 | Red | Light emitting diode |
| D2 | Green | Light emitting diode, bottom mount |
| D3 | PESD0402 | Bidirectional transient-voltage-suppression diode |
| D5 | PMEG4005EJ | Schottky diode |
| D7 | PESD3V3L4UG | Low capacitance unidirectional quadruple ESD protection diode array, 3.3V, Common Anode, SOT-353 |
| FID1-FID4 | Fiducial_0.5mm | Fiducial Marker |
| G1 | qwiic_Logo | |
| G2,G3 | SparkFun_Logo | |
| J1,J2 | Qwiic_RA | 4 pin JST 1mm polarized connector for I2C |
| J4 | USB_C_Receptacle | USB 2.0-only Type-C Receptacle connector |
| J6,J7 | Conn_01x06 | Basic 0.1" PTH |
| JP1 | LED | Solder Jumper, 2-pole, closed/bridged |
| JP2 | I2C | Solder Jumper, 3-pole, open |