SparkFun_ESP32_Qwiic_Pro_Mini
sparkfun
The ESP32 Pico in a classic Pro Mini form factor.
Components (18)
| Reference | Value | Description |
|---|---|---|
| U1 | ESP32-PICO-V3-02 | ESP32 Small Formfactor |
| U2 | AP2112K-3.3 | 600mA low dropout linear regulator, with enable pin, 3.8V-6V input voltage range, 3.3V fixed positive output, SOT-23-5 |
| C1,C6 | 10uF | Unpolarized capacitor |
| C2,C3 | 1.0uF | Unpolarized capacitor |
| D1 | Green | Light emitting diode |
| D2 | Red | Light emitting diode |
| FID1,FID2 | Fiducial_0.5 | Fiducial Marker |
| G1 | SparkFun_Logo | |
| G3 | qwiic_Logo | |
| J1 | Conn_01x06 | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2,J3 | Conn_01x12 | Generic connector, single row, 01x12, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | Qwiic_Vertical | 4 pin JST 1mm polarized connector for I2C |
| JP1 | PWR | Solder Jumper, 2-pole, closed/bridged |
| R1 | 10k | Resistor |
| R2,R5 | 1k | Resistor |
| R3,R4 | 2.2k | Resistor |
| SW1 | Reset | Single Pole Single Throw (SPST) switch |
| SW2 | Boot | Single Pole Single Throw (SPST) switch |