Endev-board
sophiayduan
3d printer monitor pcb
Components (33)
| Reference | Value | Description |
|---|---|---|
| Q1 | AO3401A | P-MOSFET transistor, drain/source/gate |
| U1 | ATmega328P-A | 20MHz, 32kB Flash, 2kB SRAM, 1kB EEPROM, TQFP-32 |
| U2 | CH340N | USB serial converter, UART, SOP-8 |
| U3 | LIS3DH | 3-Axis Accelerometer, 2/4/8/16g range, I2C/SPI interface, LGA-16 |
| U5 | TP4057 | Constant-current/constant-voltage linear charger for single cell lithium-ion batteries with 2.9V Trickle Charge, 4.5V to 6.5V VDD, -40 to +85 degree Celsius, TSOT-23-6 |
| U6 | XC6206P332MR | Positive 60-250mA Low Dropout Regulator, Fixed Output, SOT-23 |
| U7 | ESP-12F | 802.11 b/g/n Wi-Fi Module |
| U8 | ADG884xCP | 0.5Ω CMOS, Dual 2:1 MUX/SPDT Audio Switch, LFCSP-WD-10 |
| U10 | SHT31-DIS | I²C humidity and temperature sensor, ±2%RH, ±0.2°C, DFN-8 |
| A2 | Arduino_Nano_v3.x | Arduino Nano v3.x |
| BT1 | Battery_Cell | Single-cell battery |
| C1,C2,C5-C8,C16,C20 | 100nF | Unpolarized capacitor |
| C3,C4 | 12pF | Unpolarized capacitor |
| C9,C15,C19 | 10uF | Unpolarized capacitor |
| C13,C14,C18 | 1uF | Unpolarized capacitor |
| C17 | 100uF | Unpolarized capacitor |
| D18 | SK6812 | RGB LED with integrated controller |
| D25,D27 | YELLOW | Light emitting diode |
| D26,D29 | GREEN | Light emitting diode |
| D28,D30 | C8678 | 40V 3A Schottky Diode, SMA,Schottky diode |
| J1 | ICSP | Generic connector, double row, 02x03, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J3,J5 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1,R6,R11,R12,R15-R17 | 10k | Resistor |
| R2,R3 | 5k1 | Resistor |
| R7,R8,R18 | 4k7 | Resistor |
| R9,R13 | 330R | Resistor |
| R10 | 1k | Resistor |
| R19 | 1k5 | Resistor |
| SW1 | TS-1187A-B-A-B | Push button switch, generic, two pins |
| SW2 | JS102011JCQN | Switch slide, single pole double throw |
| SW4 | SW_DIP_x02 | 2x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |
| Y1 | 16 MHz C13738 | Four pin crystal, GND on pins 2 and 4 |