Loading design…
sneakylizard123-4
| Reference | Value | Description |
|---|---|---|
| Q1,Q2,Q6-Q8 | AO3400A | 30V Vds, 5.7A Id, N-Channel MOSFET, SOT-23 |
| Q3-Q5 | BSS138 | 50V Vds, 0.22A Id, N-Channel MOSFET, SOT-23 |
| U1 | ESP32-S3-WROOM-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| U2 | IP5306_I2C | |
| U3 | TPS62822DLC | 2A Step-Down Converter with DCS-Control, adjustable output, 2.4-5.5V input voltage, QFN-8 |
| U4 | LM339 | Quad Differential Comparators, SOIC-14/TSSOP-14 |
| U5 | NEO-M9N | GNSS Module NEO M8, VCC 2.7V to 3.6V |
| U6 | E22-900M30S | |
| U7 | BME280 | 3-in-1 sensor, humidity, pressure, temperature, I2C and SPI interface, 1.71-3.6V, LGA-8 |
| U8 | DS3231M | Extremely Accurate I2C-Integrated RTC/TCXO/Crystal SOIC-16 |
| U9 | INA260 | Current/power/voltage monitor with Integrated 2mΩ Shunt Resistor, 2.7V - 5.5V, I2C, TSSOP-16 |
| U10 | SCD41-D-R2 | Photoacoustic CO2 sensor, 40 000 ppm, I2C, 2.4-5.5 V, High accuracy 400 - 5000 ppm |
| U11 | MAX30102 | Heart Rate Sensor, 14-OLGA |
| U12 | TLV70218_SOT23-5 | 300mA Low Dropout Voltage Regulator, Fixed Output 1.8V, SOT-23-5 |
| C1,C9,C11,C12,C27 | 22uF | Unpolarized capacitor |
| C2-C5,C13,C18-C24,C26,C28-C31,C33-C36,C38,C39,C44 | 100n | Unpolarized capacitor |
| C6-C8,C10,C16,C17 | 10uF | Unpolarized capacitor |
| C14,C37,C43 | 4.7uF | Unpolarized capacitor |
| C15 | 120pF | Unpolarized capacitor, small symbol |
| C25,C32,C40-C42 | 1uF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| D1 | PURPLE | Light emitting diode |
| D2,D3 | WS2812B-2020 | RGB LED with integrated controller, 2.0 x 2.0 mm, 12 mA |
| D4,D11,D14 | MBR1020VL | 20V, 1A, 340 mV, Schottky Diode Rectifier, SOD-123F |
| D5 | 590nm | Light emitting diode |
| D6 | WHITE | Light emitting diode |
| D7 | RED | Light emitting diode |
| D8 | ORANGE | Light emitting diode |
| D9 | YELLOW | Light emitting diode |
| D10 | GREEN | Light emitting diode |
| D12 | BLUE | Light emitting diode |
| D13 | PINK | Light emitting diode |
| J1 | BUZZ | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | OLED | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | EXPAND | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | USB_C_Receptacle_USB2.0_14P | USB 2.0-only 14P Type-C Receptacle connector |
| J5 | Battery | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6,J9 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7,J8 | Conn_Coaxial | coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...),small coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
| J10 | VIBRATE | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 1uH | Inductor, small symbol |
| L2 | 470nH | Inductor, small symbol |
| R1,R13,R16,R26,R39-R42,R47-R50,R53 | 1k | Resistor, small US symbol |
| R2-R8,R15,R17,R21,R22,R24,R25,R29,R30,R35-R38,R43-R46,R55-R58 | 10k | Resistor, small US symbol |
| R9,R10 | 22 | Resistor, small US symbol |
| R11,R12 | 5.1k | Resistor, small US symbol |
| R14,R20 | 2 | Resistor, small US symbol |
| R18,R19 | 2.2k | Resistor, small US symbol |
| R23,R28 | 100k | Resistor, small US symbol |
| R27 | 453k | Resistor, small US symbol |
| R31 | 22k | Resistor, small US symbol |
| R32 | 16k | Resistor, small US symbol |
| R33 | 13k | Resistor, small US symbol |
| R34 | 12k | Resistor, small US symbol |
| R51,R52,R54 | 4.7k | Resistor, small US symbol |
| SW1 | BOOT | Push button switch, generic, two pins |
| SW2 | EN | Push button switch, generic, two pins |
| SW3 | USER | Push button switch, generic, two pins |
| SW4 | RotaryEncoder_Switch_MP | Rotary encoder, dual channel, incremental quadrate outputs, with switch and MP Pin |
| SW5 | SW_Push | Push button switch, generic, two pins |
| TP1 | NeopixelOut | test point |
| TP2-TP11 | TestPoint | test point |
| TP12 | 32KHz | test point |
| TP13 | RST | test point |