ESP32-S3_Module
sneakylizard123-4
Components (19)
| Reference | Value | Description |
|---|---|---|
| U1 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U2 | IP5306 | Fully-Integrated Power Bank System-On-Chip with 2.1A charger, 2.4A discharger |
| U3 | TLV75733PDBV | 1A Low IQ Small Size Low Dropout Voltage Regulator, Fixed Output 3.3V, SOT-23-5 |
| U4 | ESP32-S3-WROOM-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| C1,C2,C4,C6,C9,C11,C15,C17 | 10uF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C3,C5,C7 | 22uF | Unpolarized capacitor, small symbol |
| C8,C10,C12-C14,C16 | 100nF | Unpolarized capacitor, small symbol |
| D1-D7 | LED | Light emitting diode |
| D8 | WS2812B | RGB LED with integrated controller |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J2 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | Conn_01x22 | Generic connector, single row, 01x22, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | Conn_01x21 | Generic connector, single row, 01x21, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1 | 1uH XFL4020-102MEC | Inductor |
| R1,R2 | 5.1k | Resistor, small US symbol |
| R3,R5,R6,R8-R10 | 10k | Resistor, US symbol,Resistor, small US symbol |
| R4,R7 | 2 | Resistor, US symbol |
| R11 | 330 | Resistor, US symbol |
| SW1-SW3 | SW_Push | Push button switch, generic, two pins |