pcb
smkent
PCB designs
Components (34)
| Reference | Value | Description |
|---|---|---|
| Q1-Q3 | ZC010DNG | 35A Id, 30V Vds, Dual N-Channel MOSFET, PDFN-8(3x3) |
| Q4 | 2N7002DW | 0.115A Id, 60V Vds, Dual N-Channel MOSFET, SOT-23-6 |
| Q5 | G2N7002X | 0.340A Id, 60V Vds, N-Channel MOSFET, SOT-523 |
| Q6 | SP2006KT5 | -0.66A Id, -20V Vds, P-Channel MOSFET, SOT-563 |
| U1 | TPS54202DDCR | 2A Synchronous Step-Down Voltage Regulator, Adjustable Output Voltage, 4.5-28V Input Voltage, SOT-23-6 |
| U2 | INA226 | High-Side or Low-Side Measurement, Bi-Directional Current and Power Monitor (0-36V) with I2C Compatible Interface, VSSOP-10 |
| U3,U4 | WS2811F | 3-Channel 8-Bit PWM LED Driver, FSOP-8 |
| U5 | IRM | Infrared Receiver Module (IRM) |
| U7-U9 | NC7WZ14P6X | Dual schmitt inverter, VCC from 1.65 to 5.5 V, SOT-363-6 |
| C0 | 100u | Polarized capacitor |
| C1,C2 | 10u | Unpolarized capacitor, small symbol |
| C3,C4,C8 | 0u1 | Unpolarized capacitor, small symbol |
| C5-C7,L1 | 22u | Inductor,Unpolarized capacitor, small symbol |
| C9 | 1u | Unpolarized capacitor, small symbol |
| D1 | D_TVS | Bidirectional transient-voltage-suppression diode |
| F1 | 30V 2A | Resettable fuse, polymeric positive temperature coefficient |
| J0 | DC-005 | DC Barrel Jack with an internal switch |
| J1,J2 | JST PH | Generic connectable mounting pin connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | JST SH | JST SH connector for rotary encoder |
| J5,J6 | STEMMA-Signal | STEMMA signal connector, JST PH 2.0mm 1x03 |
| J8 | Qwiic | Qwiic connector, JST SH 1.0mm 1x04 |
| LED1 | Ice Blue | Light emitting diode |
| LED2 | Red | Light emitting diode |
| LED3 | Pink | Light emitting diode |
| LED4,LED5 | XL-B1010RGBT-HF | RGB LED, anode/red/green/blue |
| R1 | 100K | Resistor, small symbol |
| R2 | 13K | Resistor, small symbol |
| R3,R6 | 5K1 | Resistor |
| R4,R7,R11-R15 | 1K | Resistor, small symbol |
| R5,R8 | 10R | Resistor, small symbol |
| R9,R10,RN1-RN4 | 10K | 4 resistor network, parallel topology, split,Resistor, small symbol |
| SR1 | R020 | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |
| SW2-SW4 | 3.3mm | Generic push-button switch, two contact pins and mounting pin(s) |