Loading design…
smkent
PCB designs
| Reference | Value | Description |
|---|---|---|
| Q1,Q7,Q9,Q10,Q15,Q16 | PDNM6ET20V05 | 500mA Id, 20V Vds, Dual N-Channel MOSFET, SOT-563 |
| Q2,Q8,Q17,Q19 | G2N7002X | 0.340A Id, 60V Vds, N-Channel MOSFET, SOT-523 |
| Q3-Q6 | SP2301DTS | -3A Id, -20V Vds, Dual P-Channel MOSFET, SOT-23-6 |
| Q11,Q14 | SP2006KT5 | -0.66A Id, -20V Vds, P-Channel MOSFET, SOT-563 |
| U1 | USBLC6-2P6 | Very low capacitance ESD protection diode, 2 data-line, SOT-666 |
| U2 | DS8242-33SS3 | 500mA Low Dropout regulator, positive, 3.3V fixed output, SOT-23 |
| U3 | TPS563201 | 3A Synchronous Step-Down Voltage Regulator, Adjustable Output Voltage, 4.5-17V Input Voltage, SOT-23-6 |
| U4,U5 | NC7WZ14P6X | Dual schmitt inverter, VCC from 1.65 to 5.5 V, SOT-363-6 |
| U6-U9 | SN74LVC1G157DC | Single 2-input multiplexer, Low-Voltage CMOS |
| U10 | DY-IRMHA384 | 38kHz 18m ±45° 2.7V-5.5V Infrared Receiver Module (IRM) |
| U12,U13 | 74HC595 | 8-bit serial in/out Shift Register 3-State Outputs |
| U14 | MAX809C263NR | Microprocessor Reset (active-low) Circuit, 200ms delay, SOT-23 |
| U15 | SN74AHC1G08DC | Single AND Gate, 2V-5.5V CMOS, SOT-353 |
| U16 | GT0104SC | 4-Bit Bidirectional Voltage-Level Translator, Auto Direction Sensing and ±15-kV ESD Protection, 1.6 - 3.6V APort, 2.3 - 5.5V BPort, Texas_PVGFN-14 |
| C1,C2,C4,C5 | 1u | Unpolarized capacitor, small symbol |
| C6-C8 | 1000u/6.3V | Polarized capacitor |
| C9 | 330u/6.3V | Polarized capacitor |
| C10,C11,C17 | 10u | Unpolarized capacitor, small symbol |
| C12,C13 | 0u1 | Unpolarized capacitor, small symbol |
| C14,C15 | 22u | Unpolarized capacitor, small symbol |
| C16 | 100u/35V | Polarized capacitor |
| D0 | D_TVS | Bidirectional transient-voltage-suppression diode |
| D1-D7 | 1N5819WT | 40V 600mV@200mA 350mA SOD-523 Schottky Barrier Diodes, SOD-523 |
| F1 | 16V 2A | Resettable fuse, polymeric positive temperature coefficient |
| F2-F5 | 24V 50mA | Resettable fuse, polymeric positive temperature coefficient |
| J0 | DC-005 | DC Barrel Jack with an internal switch |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector, 5 amps |
| J2-J9 | PJ-327U | Audio Jack, 3 Poles (Stereo / TRS), Switched T Pole (Normalling) |
| J10,J17 | JST SH | Generic connectable mounting pin connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/),JST SH connector for rotary encoder |
| J11,J14 | Pin socket | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/),Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J12,J13 | Qwiic | Qwiic connector, JST SH 1.0mm 1x04 |
| L1 | 4u7 | Inductor |
| LED0 | XL-1606SURC | Light emitting diode, Red, Side-Emitter package |
| LED1,LED2 | XL-1606UWC | Light emitting diode, White, Side-Emitter package |
| LED3,LED4 | XL-1606UGC | Light emitting diode, Green, Side-Emitter package |
| LED5-LED8,LED19 | Ice Blue | Light emitting diode, small symbol |
| LED9-LED12,LED14-LED18 | Pink | Light emitting diode, small symbol |
| LED13 | Warm White | Light emitting diode, small symbol |
| PIX1-PIX4 | SK6812SIDE-A | RGB LED with integrated controller, side view |
| R1,R2,R16,R18-R20,R22,RN1,RN5,RN6,RN11 | 5K1 | 4 resistor network, parallel topology, split,Resistor,Resistor, small symbol |
| R3,R9 | 10K | Resistor, small symbol |
| R4 | 1K | Resistor, small symbol |
| R5-R7,R17,R30,R32-R35,RN3,RN4,RN7-RN10 | 100K | 4 resistor network, parallel topology, split,Resistor,Resistor, small symbol |
| R8 | 57K6 | Resistor, small symbol |
| R10,R11 | 2K2 | Resistor, small symbol |
| R12-R15,R24-R27 | 15R4 | Resistor |
| R37,R38 | 13K | Resistor |
| SM1 | ESP32-C3-WROOM-02 | 802.11 b/g/n WiFi and Bluetooth 5 module, ESP32C3 SoC, RISCV microprocessor, On-board antenna |
| SW1 | Tactile, right-angle | Ultraminiature Surface Mount Tactile Switch, right-angle |
| SW2 | Tactile 3.3mm | Generic push-button switch, two contact pins and mounting pin(s) |