LFR_KiCad
slimypickle
Components (19)
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | Q_NMOS_GSD | N-MOSFET transistor, gate/source/drain |
| U1 | ATmega4808-A | 20MHz, 48kB Flash, 6kB SRAM, 256B EEPROM, TQFP-32 |
| U2,U5 | MCP1700x-330xxTO | 250mA Low Quiscent Current LDO, 3.3V output, TO-92 |
| U4 | JS202011CQN | |
| C1-C3,C7,C9,C11,C12 | C | Unpolarized capacitor |
| C4 | C_Polarized | Polarized capacitor |
| C5 | 10uF | Polarized capacitor |
| C6,C8 | 100nF | Unpolarized capacitor |
| D1-D3 | SB130 | 30V 1A Schottky Barrier Rectifier Diode, DO-41 |
| J1-J5 | Conn_01x03_Pin | Generic connector, single row, 01x03, script generated |
| J6 | BATTERYIN | Generic connector, single row, 01x02, script generated |
| J7 | AVR-UPDI-6 | Atmel 6-pin UPDI connector |
| J8,J9 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
| J10 | Conn_02x05_Odd_Even | Generic connector, double row, 02x05, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1,R3-R6 | R | Resistor |
| R2 | 10k | Resistor |
| S1 | MJTP1230 | Tactile Switches 6mm TACTILE SW |
| TP1-TP6 | TestPoint | test point |
| TP7 | GND | test point |