Loading design…
slacshan
All MIDI Project for Idaho State University RCET
| Reference | Value | Description |
|---|---|---|
| U1 | PIC16F1788 | 8-bit Flash MCU, 32MHz, 16KB Flash, 1KB RAM, 256B EEPROM, SSOP-28 |
| C1 | 10µF | capacitor, small US symbol |
| D1 | 1N4148 | Diode, small symbol, filled shape |
| D2-D10 | LED_Small_Filled | Light emitting diode, small symbol, filled shape |
| J1 | Power | 2 Pin Jumper |
| J2 | ISCP | 6 Pin Jumper/Header |
| J3 | I2C Test Point | 2 Pin Jumper |
| J4-J7 | I2C Out | RJ connector, 6P4C (6 positions 4 connected) |
| J8 | MIDI In | 5-pin DIN connector |
| J9 | MIDI Through | 5-pin DIN connector |
| R1,R2,R6 | 10KΩ | Resistor, small US symbol |
| R3,R4 | 2.2KΩ | Resistor, small US symbol |
| R5 | 1KΩ | |
| SW1 | Reset | Push button switch, generic, two pins |
| SW2 | Note Selection | 4x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |
| SW3 | MIDI Channel | 4x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |
| TP1 | Clock Out | test point |
| TP2 | GND | test point |