Loading design…
shaunak153
An portable handheld soldering iron
| Reference | Value | Description |
|---|---|---|
| Q1 | BC847 | 0.1A Ic, 45V Vce, NPN Transistor, SOT-23 |
| Q2 | IRFR9024NTRPBF | Brand: Infineon Technologies Mount: Surface Mount Case/Package: DPAK Drain to Source Voltage (Vdss): -55 V Continuous Drain Current (ID): 11 A Threshold Voltage: -4 V Rds On Max: 175 mOhm Gate to Source Voltage (Vgs): 20 V Power Dissipation: 38 W Input Capacitance: 350 pF |
| U1 | CH224K | 100W USB Type-C PD3.0/2.0, BC1.2 Sink Controller, SSOP-10 |
| U2 | MCP602 | Dual 2.7V to 6.0V Single Supply CMOS Op Amps, DIP-8/SOIC-8/TSSOP-8 |
| U3 | STM32F103C8Tx | STMicroelectronics Arm Cortex-M3 MCU, 64KB flash, 20KB RAM, 72 MHz, 2.0-3.6V, 37 GPIO, LQFP48 |
| U4 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| C1,C5-C8,C10,C11 | 100nF | Unpolarized capacitor |
| C2,C3 | 1uF | Unpolarized capacitor |
| C4 | 4.7uF | Unpolarized capacitor |
| C9,C12 | 22uf/Tantalium | Tantalium |
| D1,D2 | MBR0530 | 30V 0.5A Schottky Power Rectifier Diode, SOD-123 |
| J1 | OLED | Generic connector, single row, 01x04, script generated |
| J2 | PROGRAM | Generic connector, single row, 01x06, script generated |
| J3 | VIB_SW | Generic connector, single row, 01x02, script generated |
| J4 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J5 | T+ | Generic connector, single row, 01x01, script generated |
| J6 | T- | Generic connector, single row, 01x01, script generated |
| J7 | SUP | Generic connector, single row, 01x01, script generated |
| R1,R7,R12 | 10K | Resistor |
| R2,R4,R9,R11 | 1K | Resistor |
| R3,R15 | 100K | Resistor |
| R5 | 0.05R | Resistor |
| R6 | TBD | Resistor |
| R8 | 1OK | Resistor |
| R10,R14 | 0R | Resistor |
| R13 | 27K | Resistor |
| R16 | 15K | Resistor |
| R17 | 10k | Resistor |
| SW1 | KEY1 | Omron B3FS 6x6mm single pole normally-open tactile switch |
| SW2 | KEY2 | Omron B3FS 6x6mm single pole normally-open tactile switch |