STM32_Init
serega3453
Components (25)
| Reference | Value | Description |
|---|---|---|
| Q1 | AO3400A | 30V Vds, 5.7A Id, N-Channel MOSFET, SOT-23 |
| U1 | STM32F070F6Px | STMicroelectronics Arm Cortex-M0 MCU, 32KB flash, 6KB RAM, 48 MHz, 2.4-3.6V, 15 GPIO, TSSOP20 |
| U2 | TPS54302 | 3A, 4.5 to 28V Input, EMI Friendly integrated switch synchronous step-down regulator, pulse-skipping, SOT-23-6 |
| U4 | MPU-6050 | InvenSense 6-Axis Motion Sensor, Gyroscope, Accelerometer, I2C |
| C1,C5 | 0.1u | Unpolarized capacitor |
| C2,L2 | 10u | Inductor,Unpolarized capacitor |
| C3 | 1000u | Unpolarized capacitor |
| C6,C16 | 22u | Unpolarized capacitor |
| C11,C13,C14 | 100n | Unpolarized capacitor |
| C12 | 10n | Unpolarized capacitor |
| C15 | 2.2n | Unpolarized capacitor |
| D1 | LED_RGB | RGB LED, 6 pin package |
| J1 | Load | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | Contactor | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | FCU | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | Conn_01x06_Pin | Generic connector, single row, 01x06, script generated |
| J5 | Power | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | SAFE MODE | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1,R19 | 100k | Resistor |
| R2 | 510k | Resistor |
| R3,R7,R12-R16 | 10k | Resistor |
| R4-R6 | 100 | Resistor |
| R17,R18 | 4.7k | Resistor |
| R20 | 22k | Resistor |
| SW1,SW3 | SW_DIP_x01 | 1x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |