STM32_Init
serega3453
Components (24)
| Reference | Value | Description |
|---|---|---|
| Q1 | AO3400A | 30V Vds, 5.7A Id, N-Channel MOSFET, SOT-23 |
| U1 | STM32F070F6Px | STMicroelectronics Arm Cortex-M0 MCU, 32KB flash, 6KB RAM, 48 MHz, 2.4-3.6V, 15 GPIO, TSSOP20 |
| U2 | MPU-6050 | InvenSense 6-Axis Motion Sensor, Gyroscope, Accelerometer, I2C |
| U3 | XC6206PxxxMR | Positive 60-250mA Low Dropout Regulator, Fixed Output, SOT-23 |
| U4 | MCP73831-2-OT | Single cell, Li-Ion/Li-Po charge management controller, 4.20V, Tri-State Status Output, in SOT23-5 package |
| BT1 | LiPo-1S | Multiple-cell battery |
| C1,C5,C11 | 100n | Unpolarized capacitor |
| C2 | 2.2n | Unpolarized capacitor |
| C3 | 4.7u | Unpolarized capacitor |
| C4 | 100u | Unpolarized capacitor |
| C6 | 10n | Unpolarized capacitor |
| D1 | LED_RGB | RGB LED, 6 pin package |
| D2 | LED | Light emitting diode |
| J1 | Load | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | Contactor | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | FCU | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | Conn_01x06_Pin | Generic connector, single row, 01x06, script generated |
| J5 | Power | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1,R2 | 4.7k | Resistor |
| R3,R7 | 10k | Resistor |
| R4-R6 | 100 | Resistor |
| R8 | 470R | Resistor |
| R9 | 2k | Resistor |
| SW1 | SW_DIP_x01 | 1x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |