Cfg.CameraControl.Hardware
sensslen
Hardware needed to control a lanc camera with a PTZ head
Components (19)
| Reference | Value | Description |
|---|---|---|
| Q1,Q2,Q5 | BSS123 | 0.17A Id, 100V Vds, N-Channel MOSFET, SOT-23 |
| Q4 | MUN5211DW1 | 0.1A Ic, 50V Vce, Dual NPN Bias Resistor Transistors, SOT-363 |
| U1 | WT32-ETH01 | An ESP32 Dev board with onboard ethernet. Produced by wireless-tag. |
| U2,U4 | DRV8212DRLR | |
| U5 | 74LVC2T45DC | Dual supply translating transceiver, 3-state, 2-bit, VSSOP-8 |
| C1,C3,C5,C6 | 1uF | |
| C2,C4 | 100nF | |
| D1,D2 | 150066RG74000 | |
| J1 | 5V input | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | Pan | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | Tilt | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | SJ1-2503A | |
| J6 | Prog | Generic connector, single row, 01x06, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | Sensor | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1 | 10K | |
| R2 | 3.3K | |
| R3,R4 | 150 | |
| R5,R6 | 100 | |
| R7,R8 | 10K/5% |