Loading design…
segfau-yama
| Reference | Value | Description |
|---|---|---|
| U1 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U2 | ESP32-S3-WROOM-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| U3 | NJM4558 | Dual Operational Amplifier, DIP-8/DMP-8/SIP-8/SOP-8/SSOP-8 |
| U4 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U5 | PCM5102A | 2.1 VRMS, 112dB Audio Stereo DAC with PLL and 32-bit, 384kHz PCM Interface, TSSOP-20 |
| U6 | LM2776 | Switched capacitor inverter, inverts positive voltage +2.7 to +5.5V to negative, 200mA, SOT-23-6 |
| C1,C3,C9-C11,C17 | 0.1u | Unpolarized capacitor |
| C2,C5 | 22u | Polarized capacitor |
| C4,C13-C15,C19 | 10u | Polarized capacitor |
| C6,C7 | 2.2n | Unpolarized capacitor |
| C8 | 1u | Unpolarized capacitor |
| C12,C16,C18 | 2.2u | Unpolarized capacitor |
| D1-D3 | LED | Light emitting diode |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J2 | AudioJack3 | Audio Jack, 3 Poles (Stereo / TRS) |
| J3-J5 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6,J7 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8,J9 | Conn_01x05 | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J10 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J11 | Conn_01x09 | Generic connector, single row, 01x09, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1-R3,RV1,RV2 | 10k | Potentiometer,Resistor |
| R4,R5 | 5.1k | Resistor |
| R6-R8 | 470 | Resistor |
| R9,R10 | 10 | Resistor |
| SW1-SW7 | SW_Push | Push button switch, generic, two pins |