Loading design…
scular-HCC
Dual laster Pound-Dreaver-Hall driver setup. 1550 nm DFBs. Q=10^-5. Less than 20 GHz difference
| Reference | Value | Description |
|---|---|---|
| Q3 | IRF540ZPBF | N-MOSFET transistor, drain/gate/source |
| Q4 | IRF9540NPBF | P-MOSFET transistor, drain/gate/source |
| Q5 | MMBT2907 | PNP bipolar junction transistor |
| Q6 | MMBT2222 | |
| Q7,Q8 | Q_PNP_MJL21193 | PNP bipolar junction transistor |
| Q9,Q10 | Q_NPN MJL21194 | NPN bipolar junction transistor |
| U11,U12 |
| Adjustable Precision Micropower Shunt Voltage Reference, SOT-23,Adjustable Precision Micropower Shunt Voltage Reference, TO-92 |
| C34-C39 | 3300uF (UPW1E332MHD) | Polarized capacitor |
|---|
| C40,C41,C48,C49 | 1000uF 25V | Polarized capacitor |
|---|
| C42,C43 | 470nF |
|---|
| C44,C45,C52,C53 | 2.2 uF |
|---|
| C46,C47 | 2200uF 35V | Polarized capacitor |
|---|
| C50 | 1000 uF C_out+ |
|---|
| C51 | 1000 uF C_out- |
|---|
| D7 | GBPC1510W | Single-Phase Bridge Rectifier, 15A If, GBPC package |
|---|
| D8,D9 | 1N4742A | 1300mW Silicon planar power Zener diodes, DO-41 |
|---|
| D10,D11 | 1N4148W | 75V 0.15A Fast Switching Diode, SOD-123 |
|---|
| D_CP1,D_CP2 | 1N4148 | onsemi 1N4148WT1G) — 100 V, 150 mA, fast switching |
|---|
| HS1 | Heatsink Boyd 6223BG (GBPC) | Bridge rectifier heatsink, DK 6223BG-ND |
|---|
| HS2,HS3 | Heatsink Boyd 531102B02500G | Heatsink TO-220 board-mount, DK HS352-ND |
|---|
| J4 | Screw_Terminal_01x03 | Phoenix MKDS 1,5/3-5,08 single-piece PCB screw terminal = 1729131 |
|---|
| J6 | DIN41612_03x32_C_Split |
|---|
| R20,R21 | 15R | Resistor |
|---|
| R22,R23 | 100k | Resistor |
|---|
| R24,R31 | 60.4k | Resistor |
|---|
| R25,R30 | 15k | Resistor |
|---|
| R26,R27 | 1M | Resistor |
|---|
| R28,R29 | 1.5k Bias | Resistor |
|---|
| R34-R37 | 0.1R | Resistor |
|---|
| R38,R39 | 1k bleed resistor | Resistor |
|---|
| R40-R43 | 10R base-stopper | Resistor |
|---|