NoodleBoard
sanoojes
A simple Development Board using RP2040 for the Blueprint Event
Components (20)
| Reference | Value | Description |
|---|---|---|
| U1 | RP2040 | A microcontroller by Raspberry Pi |
| U2 | ME6211C33M5 | 500mA low dropout linear regulator, shutdown pin, 6.5V max input voltage, 3.3V fixed positive output, SOT-23-5 |
| U3 | W25Q16JVZPIQ TR | 128Mbit / 16MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 |
| C1-C8,C10,C11,C17 | 100n | Unpolarized capacitor |
| C9,C12 | 1u | Unpolarized capacitor |
| C13,C14 | 10u | Unpolarized capacitor |
| C15,C16 | 33p | Unpolarized capacitor |
| D1,D2 | LED | Light emitting diode |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J2 | Left | Generic connector, single row, 01x20, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | Right | Generic connector, single row, 01x20, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | Middle | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | Bottom | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1,R2 | 5.1k | Resistor |
| R3,R4 | 27 | Resistor |
| R5,R7-R9 | 1k | Resistor |
| R6 | 10k | Resistor |
| SW1 | Boot | Push button switch, normally open, two pins, 45° tilted |
| SW2 | Reset | Push button switch, normally open, two pins, 45° tilted |
| Y1 | 12MHz | Four pin crystal, GND on pins 2 and 4 |